File Info
| Exam | Cisco Certified Network Associate (200-301 CCNA) |
| Number | 200-301 |
| File Name | Cisco.200-301.VCEplus.2020-03-10.91q.vcex |
| Size | 5 MB |
| Posted | Mar 10, 2020 |
| Download | Cisco.200-301.VCEplus.2020-03-10.91q.vcex |
How to open VCEX & EXAM Files?
Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.
Coupon: MASTEREXAM
With discount: 20%
Demo Questions
Question 1
Refer to the exhibit. Which type of route does R1 use to reach host 10.10.13.10/32?
- default route
- network route
- host route
- floating static route
Correct answer: B
Question 2
Refer to the exhibit. Which prefix does Router1 use to Host A?
- 10.10.10.0/28
- 10.10.13.0/25
- 10.10.13.144/28
- 10.10.13.208/29
Correct answer: D
Question 3
A frame that enters a switch fails the Frame Check Sequence. Which two interface counters are incremented? (Choose two.)
- input errors
- frame
- giants
- CRC
- runts
Correct answer: AD
Question 4
How do TCP and UDP differ in the way that they establish a connection between two endpoints?
- TCP uses the three-way handshake, and UDP does not guarantee message delivery.
- TCP uses synchronization packets, and UDP uses acknowledgement packets.
- UDP provides reliable message transfer, and TCP is a connectionless protocol.
- UDP uses SYN, SYN ACK, and FIN bits in the frame header while TCP uses SYN, SYN ACK, and ACK bits.
Correct answer: A
Question 5
Which 802.11 frame type is association response?
- management
- protected frame
- action
- control
Correct answer: A
Explanation:
Reference: https://en.wikipedia.org/wiki/802.11_Frame_Types Reference: https://en.wikipedia.org/wiki/802.11_Frame_Types
Question 6
In which way does a spine-and-leaf architecture allow for scalability in a network when additional access ports are required?
- A spine switch and a leaf switch can be added with redundant connections between them.
- A spine switch can be added with at least 40 GB uplinks.
- A leaf switch can be added with connections to every spine switch.
- A leaf switch can be added with a single connection to a core spine switch.
Correct answer: C
Question 7
Which statement identifies the functionality of virtual machines?
- The hypervisor communicates on Layer 3 without the need for additional resources.
- Each hypervisor can support a single virtual machine and a single software switch.
- The hypervisor can virtual physical components including CPU, memory, and storage.
- Virtualized servers run most efficiently when they are physically connected to a switch that is separate from the hypervisor.
Correct answer: C
Question 8
Which command automatically generates an IPv6 address from a specified IPv6 prefix and MAC address of an interface?
- ipv6 address dhcp
- ipv6 address 2001:DB8:5:112::/64 eui-64
- ipv6 address autoconfig
- ipv6 address 2001:DB8:5:112::2/64 link-local
Correct answer: C
Question 9
When configuring IPv6 on an interface, which two IPv6 multicast groups are joined? (Choose two.)
- 2000::/3
- 2002::5
- FC00::/7
- FF02::1
- FF02::2
Correct answer: DE
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/xe-3s/ipv6-xe-36s-book/ip6-multicast.html Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/xe-3s/ipv6-xe-36s-book/ip6-multicast.html
Question 10
What is the default behavior of a Layer 2 switch when a frame with an unknown destination MAC address is received?
- The Layer 2 switch forwards the packet and adds the destination MAC address to its MAC address table.
- The Layer 2 switch sends a copy of a packet to CPU for destination MAC address learning.
- The Layer 2 switch floods packets to all ports except the receiving port in the given VLAN.
- The Layer 2 switch drops the received frame.
Correct answer: C
Explanation:
