Download Interconnecting Cisco Networking Devices Part 2 (ICND2 v3-0).testking.200-105.2018-11-08.1e.355q.vcex

Download Dump

File Info

Exam Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)
Number 200-105
File Name Interconnecting Cisco Networking Devices Part 2 (ICND2 v3-0).testking.200-105.2018-11-08.1e.355q.vcex
Size 12.07 Mb
Posted November 08, 2018
Downloaded 24



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase

Coupon: MASTEREXAM
With discount: 20%

 
 



Demo Questions

Question 1

Routers R1 and R2 are on the same network segment, and both routers use interface GigabitEthernet0/0. If R1 loses communication to R2, which two items should you check as you begin troubleshooting? (Choose two.)

  • A: Verify that R2 is using 802.1q encapsulation.
  • B: Verify that the GigabitEthernet0/0 interfaces on R1 and R2 are configured with the same subnet mask.
  • C: Verify that the R1 GigabitEthernet0/0 interface is up and the line protocol is down.
  • D: Verify that R1 and R2 both are using HDLC encapsulation.
  • E: Verify that the R1 GigabitEthernet0/0 interface is up and the line protocol is up.

Correct Answer: BE




Question 2

Which command do you enter to enable an interface to support PPPoE on a client?

  • A: Dev1(config)# bba-group pppoe bba1
  • B: Dev1(config-if)# pppoe-client dial-pool-number 1
  • C: Dev1(config-if)# pppoe enable group bba1
  • D: Dev1(config-if)# pppoe enable

Correct Answer: D




Question 3

Which three options are types of slow VLAN connectivity? (Choose three.)

  • A: slow broadcast domain connectivity
  • B: slow routing domain connectivity
  • C: slow default gateway connectivity
  • D: slow application domain connectivity
  • E: slow collision domain connectivity
  • F: slow inter-VLAN connectivity

Correct Answer: AEF




Question 4

Which value can you modify to configure a specific interface as the preferred forwarding interface?

  • A: the VLAN priority
  • B: the hello time
  • C: the port priority
  • D: the interface number

Correct Answer: C




Question 5

Which WAN technology uses labels to make decisions about data forwarding?

  • A: Metro Ethernet
  • B: Frame Relay
  • C: MPLS
  • D: ISDN
  • E: VSAT

Correct Answer: C




Question 6

Which two actions must you take to configure a PAgP EthernetChannel between two switches, S1 and S2? (Choose two.)

  • A: Configure the channel-group 1 mode auto command on S1.
  • B: Configure the channel-group 1 mode desirable command on S2.
  • C: Configure the channel-group 1 mode active command on S2.
  • D: Configure the channel-gr oup 1 mode on command on S2.
  • E: Configure the channel-group 1 mode active command on S1.

Correct Answer: AB




Question 7

Which command can you enter to assign an interface to the default VLAN?

  • A: Switch(config-if)# switchport access vlan 1
  • B: Switch(config-if)# switchport trunk native vlan 1
  • C: Switch(config-if)# vlan 1
  • D: Switch(config)# int vlan 1

Correct Answer: A




Question 8

Which feature can you use to restrict SNMP queries to a specific OID tree?

  • A: a server group
  • B: a view record
  • C: a community
  • D: an access group

Correct Answer: B




Question 9

Refer to the exhibit. 

  

While you troubleshoot a connectivity issue to a PC behind R1, you enter the show access-lists command to generate this output.  
Which reason for the problem is most likely true?

  • A: The permit all ACL entry on R1 is inactive.
  • B: The ACL of R1 is misconfigured.
  • C: A deny all ACL entry is currently active on R1.
  • D: An implicit deny is causing R1 to block network traffic.

Correct Answer: D




Question 10

  

Refer to the exhibit. A technician has configured the FastEthernet0/1 interface on Sw11 as an access link in VLAN 1. Based on the output from the show vlan brief command issued on Sw12, what will be the result of making this change on Sw11?

  • A: Hosts will not be able to communicate between the two switches.
  • B: The hosts in all VLANs on the two switches will be able to communicate with each other.
  • C: Only the hosts in VLAN 10 and VLAN 15 on the two switches will be able to communicate with each other.
  • D: Only the hosts in VLAN 1 on the two switches will be able to communicate with each other.

Correct Answer: A

VLANs are local to each switches database, and VLAN information is not passed between switches. Trunks carry traffic from all VLANs to and from the switch by default but can be configured to carry only specified VLAN traffic. Trunk links are required to pass VLAN information between switches. So Sw 11 port should be trunk not access port. Additionally, there are no ports assigned to VLAN 1.










CONNECT US

Facebook

Twitter

PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount!



HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files