Download CCNA Cisco Certified Network Associate CCNA (v3-0).CertDumps.200-125.1e.1123q.vcex

Download Exam

File Info

Exam CCNA Cisco Certified Network Associate CCNA (v3.0)
Number 200-125
File Name CCNA Cisco Certified Network Associate CCNA (v3-0).CertDumps.200-125.1e.1123q.vcex
Size 56.95 Mb
Posted November 30, 1999
Downloads 249
Download CCNA Cisco Certified Network Associate CCNA (v3-0).CertDumps.200-125.1e.1123q.vcex

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.


With discount: 20%


Demo Questions

Question 1

In which two formats can the IPv6 address fd15:0db8:0000:0000:0700:0003:400F:572B be written? (Choose two.)

  • A: fd15:0db8:0000:0000:700:3:400F:527B
  • B: fd15::db8::700:3:400F:527B
  • C: fd15:db8:0::700:3:4F:527B
  • D: fd15:0db8::7:3:4F:527B
  • E: fd15:db8::700:3:400F:572B

Correct Answer: AE

Question 2

What are three characteristics of the TCP protocol? (Choose three.)

  • A: It uses a single SYN-ACK message to establish a connection.
  • B: The connection is established before data is transmitted.
  • C: It ensures that all data is transmitted and received by the remote device.
  • D: It supports significantly higher transmission speeds than UDP.
  • E: It requires applications to determine when data packets must be retransmitted.
  • F: It uses separate SYN and ACK messages to establish a connection.

Correct Answer: BCF

Question 3

Drag and drop the Ethernet terms from the left onto the correct descriptions on the right. 

Correct Answer: Exam simulator is required


Question 4

Refer to the exhibit. 


All of the routers in the network are configured with the ip subnet-zero command. Which network addresses should be used for Link A and Network A? (Choose two.)

  • A: Link A –
  • B: Link A –
  • C: Network A –
  • D: Network A –
  • E: Link A –
  • F: Network A –

Correct Answer: AD

Question 5

Which type of device can be replaced by the use of subinterfaces for VLAN routing?

  • A: Layer 2 bridge
  • B: Layer 2 switch
  • C: Layer 3 switch
  • D: router

Correct Answer: C

Question 6

What are two benefits of private IPv4 IP addresses? (Choose two.)

  • A: They are routed to the Internet the same as public IP addresses.
  • B: They are less costly than public IP addresses.
  • C: They can be assigned to devices without Internet connections.
  • D: They eliminate the necessity for NAT policies.
  • E: They eliminate duplicate IP conflicts.

Correct Answer: BC

Question 7

Which two server types are used to support DNS lookup? (Choose two.)

  • A: web server
  • B: ESX host
  • C: authoritative name server
  • D: file transfer server
  • E: name resolver

Correct Answer: CE

Question 8

Which three statements about IPv6 prefixes are true? (Choose three.)

  • A: FEC0::/10 is used for IPv6 broadcast.
  • B: FC00::/7 is used in private networks.
  • C: FE80::/8 is used for link-local unicast.
  • D: FE80::/10 is used for link-local unicast.
  • E: 2001::1/127 is used for loopback addresses.
  • F: FF00::/8 is used for IPv6 multicast.

Correct Answer: BDF

Question 9

Refer to the exhibit. 


The network administrator cannot connect to Switch 1 over a Telnet session, although the hosts attached to Switch1 can ping the interface Fa0/0 of the router. Given the information in the graphic and assuming that the router and Switch2 are configured properly, which of the following commands should be issued on Switch1 to correct this problem?

  • A: Switch1(config)# ip default-gateway
  • B: Switch1(config)# interface fa0/1 
    Switch1(config-if)# switchport mode trunk
  • C: Switch1(config)# line con0 
    Switch1(config-line)# password cisco 
    Switch1(config-line)# login
  • D: Switch1(config)# interface fa0/1 
    Switch1(config-if)# ip address
  • E: Switch1(config)# interface fa0/1 
    Switch1(config-if)# duplex full 
    Switch1(confiq-if)# speed 100

Correct Answer: A

Question 10

Which two statements about IPv6 and routing protocols are true? (Choose two.)

  • A: EIGRPv3 was developed to support IPv6 routing.
  • B: OSPFv3 was developed to support IPv6 routing.
  • C: Loopback addresses are used to form routing adjacencies.
  • D: EIGRP, OSPF, and BGP are the only routing protocols that support IPv6.
  • E: Link-local addresses are used to form routing adjacencies.

Correct Answer: BE





You can buy ProfExam with a 20% discount!


Use ProfExam Simulator to open VCEX and EXAM files