File Info
| Exam | CCDA - Designing for Cisco Internetwork Solutions |
| Number | 200-310 |
| File Name | CCDA -Designing for Cisco Internetwork Solutions.pass4sure.200-310.2019-06-03.1e.380q.vcex |
| Size | 5.16 Mb |
| Posted | June 03, 2019 |
| Downloads | 212 |
| Download | CCDA -Designing for Cisco Internetwork Solutions.pass4sure.200-310.2019-06-03.1e.380q.vcex |
How to open VCEX & EXAM Files?
Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.
Coupon: MASTEREXAM
With discount: 20%
Demo Questions
In which phase of PPDIOO are the network requirements identified?
- A: Design
- B: Plan
- C: Prepare
- D: Implement
- E: Operate
- F: Optimize
Correct Answer: B
Plan Phase
The Plan phase identifies the network requirements based on goals, facilities, and user needs. This phase characterizes sites and assesses the network, performs a gap analysis against best-practice architectures, and looks at the operational environment. A project plan is developed to manage the tasks, responsible parties, milestones, and resources to do the design and implementation. The project plan aligns with the scope, cost, and resource parameters established with the original business requirements. This project plan is followed (and updated) during all phases of the cycle.
Which is part of the Prepare phase of PPDIOO?
- A: Obtain site contact information
- B: Perform network audit
- C: Identify customer requirements
- D: Perform gap analysis
Correct Answer: C
Prepare Phase
The Prepare phase establishes organization and business requirements, develops a network strategy, and proposes a high-level conceptual architecture to support the strategy. Technologies that support the architecture are identified. This phase creates a business case to establish a financial justification for a network strategy.
When designing the identity and access control portions for the enterprise campus network, which of these solutions would be the most appropriate solution to consider?
- A: 802.1X
- B: ACLs in the core layer
- C: Cisco Security MARS
- D: NetFlow
Correct Answer: A
Which is the purpose of the Cisco NAC Profiler?
- A: Automates discovery and inventory of all LAN attached devices
- B: Generates a profile based on username and group
- C: Learns and creates a database of virus definitions based on LAN traffic
- D: A database used to map user VPN accounts
Correct Answer: A
Cisco Identity-Based Networking Services relies heavily on the 802.1X protocol. Which other authentication solution is used hand-in-hand with 802.1X to authenticate users for network access?
- A: RADIUS
- B: LEAP
- C: IPsec
- D: TACACS
- E: ISAKMP
Correct Answer: A
The Cisco Identity-Based Network Services solution is a way to authenticate host access based on policy for admission to the network. IBNS supports identity authentication, dynamic provisioning of VLANs on a per-user basis, guest VLANs, and 802.1X with port security.
The 802.1 X protocol is a standards-based protocol for authenticating network clients by permitting or denying access to the network. The 802.1 X protocol operates between the end-user client seeking access and an Ethernet switch or wireless access point (AP) providing the connection to the network. In 802.1 X terminology, clients are called supplicants, and switches and APs are called authenticates. A back-end RADIUS server such as a Cisco Access Control Server (ACS) provides the user account database used to apply authentication and authorization.
With an IBNS solution, the host uses 802.IX and Extensible Authentication Protocol over LANs (EAPoL) to send the credentials and initiate a session to the network. After the host and switch establish LAN connectivity, username and password credentials are requested. The client host then sends the credentials to the switch, which forwards them to the RADIUS ACS.
The RADIUS ACS performs a lookup on the username and password to determine the credentials' validity. If the username and password are correct, an accept message is sent to the switch or AP to allow access to the client host. If the username and password are incorrect, the server sends a message to the switch or AP to block the host port.
Figure 13-4 illustrates the communication flow of two hosts using 802.1X and KAPoL with the switch, AP, and back-end RADIUS server.
Which protocol is used for voice bearer traffic?
- A: MGCP
- B: RTP
- C: SCCP
- D: CDP
- E: ICMP
Correct Answer: B
A number of different protocols are used in a VoIP environment for call control, device provisioning, and addressing.
Figure 14-15 shows those protocols focused on VoIP control and transport.
Which protocol is used to reserve bandwidth for the transport of a particular application data flow across the network?
- A: cRTP
- B: IEEE 802.1P
- C: RSVP
- D: LFI
- E: Auto QOS
Correct Answer: C
Which two features are supported by single wireless controller deployments? (Choose two.)
- A: automatic detection and configuration of LWAPPs
- B: LWAPP support across multiple floors and buildings
- C: automatic detection and configuration of RF parameters
- D: Layer 2 and Layer 3 roaming
- E: controller redundancy
- F: mobility groups
Correct Answer: AB
Which IPv6 feature enables routing to distribute connection requests to the nearest content server?
- A: Link-local
- B: Site-local
- C: Anycast
- D: Multicast
- E: Global aggregatable
Correct Answer: C
Reference: http://en.wikipedia.org/wiki/Anycast
What is the recommended spanning tree protocol to use for all Layer 2 deployments in a branch office environment?
- A: CST
- B: RSPT
- C: PVST
- D: MISTP
- E: Rapid PVST +
Correct Answer: E
