Download Implementing Cisco Wireless Network Fundamentals.CertDumps.200-355.2019-10-01.1e.341q.vcex

Download Exam

File Info

Exam Implementing Cisco Wireless Network Fundamentals
Number 200-355
File Name Implementing Cisco Wireless Network Fundamentals.CertDumps.200-355.2019-10-01.1e.341q.vcex
Size 13.08 Mb
Posted October 01, 2019
Downloads 17
Download Implementing Cisco Wireless Network Fundamentals.CertDumps.200-355.2019-10-01.1e.341q.vcex

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.


With discount: 20%


Demo Questions

Question 1

Which two items are needed to discover the IP address of a new Cisco Aironet 1260 autonomous AP that just finished booting? (Choose two.)

  • A: username = "cisco" and password = "cisco"
  • B: username = "Admin" and password = "Cisco"
  • C: username = none and password = "Cisco"
  • D: show int vlan1
  • E: show int bvi1
  • F: show int gigabitethernet0
  • G: show int radio0-802.11n
  • H: show int radio1-802.11n

Correct Answer: CE

Enter your username in the User Name field. The default username is Cisco. Enter the wireless device password in the Password field and press Enter. The default password is Cisco. The Summary Status page appears. 
The access point is configured with the factory default values including the IP address (set to receive an IP address using DHCP). To obtain the new IP address for an access point/bridge, you can use the show interface bvi1 CLI command.

Question 2

During which type of survey does the surveyor interact with the infrastructure?

  • A: planning
  • B: active
  • C: passive
  • D: predictive

Correct Answer: B

Question 3

A customer is concerned about ease of wireless management. Which deployment model requires the highest administrative overhead to deploy and manage?

  • A: autonomous
  • B: local mode
  • C: cloud
  • D: converged

Correct Answer: A

Question 4

Which wireless client attempts to authenticate by using 802.1X?

  • A: supplicant
  • B: authenticator
  • C: EAP

Correct Answer: A

802.1x is an Institute of Electrical and Electronics Engineers (IEEE) standard that provides an authentication framework for WLANs. 802.1x uses the Extensible Authentication Protocol (EAP) to exchange messages during the authentication process. The authentication protocols that operate inside the 802.1x framework that are suitable for wireless networks include EAP-Transport Layer Security (EAP-TLS), Protected EAP (PEAP), and EAP-Tunneled TLS (EAP-TTLS). These protocols allow the network to authenticate the client while also allowing the client to authenticate the network. 
802.1x authentication consists of three components:

Question 5

Refer to the exhibit. 


You made a manual configuration change to a controller and now you need to compare the controller configuration seen on Cisco WCS to the configuration that is present in the controller. Which menu can you use to do compare the configurations?

  • A: Reports
  • B: Monitor
  • C: Configure
  • D: Services
  • E: Administration
  • F: Tools

Correct Answer: C

Question 6

Which two commands are needed to ensure that Cisco WLC can be managed only via a secure web browser, with a cipher of 128 bits or larger and without Telnet or SSH? (Choose two.)

  • A: config network ssh disable
  • B: config network secureweb enable
  • C: config network secureweb cipher-option high enable
  • D: config network secureweb cipher-option sslv2 disable
  • E: config network webmode enable

Correct Answer: BC


Question 7

Which Cisco WCS tool allows you to view current reports, open specific types of reports, create and save new reports, and manage scheduled runs?

  • A: Reports menu
  • B: Reports launch page
  • C: Scheduled Run results
  • D: saved reports

Correct Answer: B

The report launch pad provides access to all NCS reports from a single page. From this page, you can view current reports, open specific types of reports, create and save new reports, and manage scheduled runs.

Question 8

A remote site has requested that its wireless client traffic egress at the switch port of the access point. Which access point mode can be used?

  • A: FlexConnect
  • B: local
  • C: monitor
  • D: rogue detector
  • E: SE-Connect

Correct Answer: A

Question 9

From which type of diagnostic equipment must you request screenshots and recordings of possible sources of interference when you have a survey vendor perform a site survey?

  • A: data link circuit identifier
  • B: access point
  • C: virtual path virtual circuit
  • D: spectrum analysis software

Correct Answer: D

Question 10

Which two statements about WiMAX technology are true? (Choose two.)

  • A: WiMAX is defined by 802.11i.
  • B: Typically, fixed WiMAX networks have a higher-gain directional antenna installed near the client.
  • C: WiMAX is capable of working as a long-range system over several miles.
  • D: WiMAX works only for licensed frequencies.

Correct Answer: BC

WiMAX is defined by 802.16, that is intended for wireless "metropolitan area networks". WiMAX can provide broadband wireless access (BWA) up to 30 miles (50 km) for fixed stations, and 3 - 10 miles (5 - 15 km) for mobile stations. In contrast, the WiFi/802.11 wireless local area network standard is limited in most cases to only 100 - 300 feet (30 - 100 m). Fixed WiMAX networks typically have a higher -gain directional antenna installed near the client (customer) which results in greatly increased range and throughput. Using 802.11 with high-gain antenna can bridge last-mile gaps, but they require more power. WiMAX operates on both licensed and non-licensed frequencies, providing a regulated environment and viable economic model for wireless carriers. In particular, WiMax operates on the 10-to 66-GHz frequency band, so it doesn't interfere with 802.11 LANs.





You can buy ProfExam with a 20% discount!


Use ProfExam Simulator to open VCEX and EXAM files