Download Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2).pass4sureexam.300-075.2020-01-09.1e.312q.vcex

Download Exam

File Info

Exam Implementing Cisco IP Telephony & Video, Part 2 v1.0
Number 300-075
File Name Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2).pass4sureexam.300-075.2020-01-09.1e.312q.vcex
Size 10.15 Mb
Posted January 09, 2020
Downloads 25
Download Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2).pass4sureexam.300-075.2020-01-09.1e.312q.vcex

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase

Coupon: MASTEREXAM
With discount: 20%



 
 



Demo Questions

Question 1

Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?

  • A: On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
  • B: On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
  • C: On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.
  • D: On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.

Correct Answer: A




Question 2

Refer to the exhibit. 

  

Which statement is true?

  • A: Endpoints can make calls to unknown IP addresses without the VCS querying any neighbors.
  • B: If the VCS receives a call to an unknown IP address, it queries its neighbors for the remote address and if permitted, it routes the call through the neighbor.
  • C: Endpoints that are registered directly to the VCS can call only an IP address of a system that is also registered directly to that VCS.
  • D: Dialing by IP address is not supported on VCS.

Correct Answer: A




Question 3

Which three statements about configuring an encrypted trunk between Cisco TelePresence Video Communication Server and Cisco Unified Communications Manager are true? (Choose three.)

  • A: The root CA of the VCS server certificate must be loaded in Cisco Unified Communications Manager.
  • B: A SIP trunk security profile must be configured with Incoming Transport Type set to TCP+UDP.
  • C: The Cisco Unified Communications Manager trunk configuration must have the destination port set to 5061.
  • D: A SIP trunk security profile must be configured with Device Security Mode set to TLS.
  • E: A SIP trunk security profile must be configured with the X.509 Subject Name from the VCS certificate.
  • F: The Cisco Unified Communications Manager zone configured in VCS must have SIP authentication trust mode set to On.
  • G: The Cisco Unified Communications Manager zone configured in VCS must have TLS verify mode set to Off.

Correct Answer: ACE




Question 4

Which two statements about configuring mobile and remote access on Cisco TelePresence Video Communication Server Expressway are true? (Choose two.)

  • A: The traversal server zone on Expressway-C must have a TLS verify subject name configured.
  • B: The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.
  • C: The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.
  • D: The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
  • E: The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On.

Correct Answer: BE




Question 5

Which two options are configuration steps on Cisco Unified Communications Manager that are used when integrating with VCS Expressway servers? (Choose two.)

  • A: allowing numeric dialing from Cisco phones to Expressway
  • B: configuring a device pool with video feature enabled
  • C: allowing dialing to Expressway domain from Cisco phones
  • D: creating an application user on Cisco Unified Communications Manager with assigned privileges
  • E: adding the Expressway servers to the Application Servers list

Correct Answer: AC




Question 6

Which two statements regarding IPv4 Static NAT address 209.165.200.230 has been configured on a VCS Expressway are true? (Choose two.)

  • A: The Advanced Networking or Dual Network Interfaces option key has been installed.
  • B: VCS rewrites the Layer 3 source address of outbound SIP and H.323 packets to 209.165.200.230.
  • C: VCS applies 209.165.200.230 to outbound SIP and H.323 payload messages.
  • D: With static NAT enabled on the LAN2 interface, VCS applies 209.165.200.230 to outbound H.323 and SIP payload traffic exiting the LAN1 interface.

Correct Answer: AC




Question 7

If delegated credentials checking has been enabled and remote workers can register to the Expressway, which statement is true?

  • A: H.323 message credential checks are delegated.
  • B: SIP registration proxy mode is set to On in the Expressway.
  • C: A secure neighbor zone has been configured between the Expressway and the Expressway Control.
  • D: SIP registration proxy mode is set to Off in the Expressway.

Correct Answer: D




Question 8

Which two statements regarding you configuring a traversal server and traversal client relationship are true? (Choose two.)

  • A: VCS supports only the H.460.18/19 protocol for H.323 traversal calls.
  • B: VCS supports either the Assent or the H.460.18/19 protocol for H.323 traversal calls.
  • C: VCS supports either the Assent or the H.460.18/19 protocol for SIP traversal calls.
  • D: If the Assent protocol is configured, a TCP/TLS connection is established from the traversal client to the traversal server for SIP signaling.
  • E: A VCS Expressway located in the public network or DMZ acts as the firewall traversal client.

Correct Answer: BD




Question 9

What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence endpoints?

  • A: CS3 (24)
  • B: EF (46)
  • C: AF41 (34)
  • D: CS4 (32)

Correct Answer: D




Question 10

When you configure QoS on VCS, which settings do you apply if traffic through the VCS should be tagged with DSCP AF41?

  • A: Set QoS mode to DiffServ and tag value 32.
  • B: Set QoS mode to IntServ and tag value to 34.
  • C: Set QoS mode to DiffServ and tag value 34.
  • D: Set QoS mode to IntServ and tag value to 32.
  • E: Set QoS mode to ToS and tag value to 32.

Correct Answer: C










CONNECT US

Facebook

Twitter

PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount!



HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files