Download Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v2-0).pass4sures.300-135.2018-09-18.1e.53q.vcex

Download Exam

File Info

Exam Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v2.0)
Number 300-135
File Name Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v2-0).pass4sures.300-135.2018-09-18.1e.53q.vcex
Size 8.38 Mb
Posted September 18, 2018
Downloads 125
Download Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v2-0).pass4sures.300-135.2018-09-18.1e.53q.vcex

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase

Coupon: MASTEREXAM
With discount: 20%



 
 



Demo Questions

Question 1

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
On which device is the fault condition located?

  • A: R1
  • B: R2
  • C: R3
  • D: R4
  • E: DSW1
  • F: DSW2
  • G: ASW1

Correct Answer: A

On R1 we need to add the client IP address for reachability to server to the access list that is used to specify which hosts get NATed.




Question 2

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
The fault condition is related to which technology?

  • A: BGP
  • B: NTP
  • C: IP NAT
  • D: IPv4 OSPF Routing
  • E: IPv4 OSPF Redistribution
  • F: IPv6 OSPF Routing
  • G: IPv4 layer 3 security

Correct Answer: C

On R1 we need to add the client IP address for reachability to server to the access list that is used to specify which hosts get NATed.




Question 3

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
What is the solution to the fault condition?

  • A: Under the interface Serial0/0/0 configuration enter the ip nat inside command.
  • B: Under the interface Serial0/0/0 configuration enter the ip nat outside command.
  • C: Under the ip access-list standard nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command.
  • D: Under the ip access-list standard nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command.

Correct Answer: C

On R1 we need to add the client IP address for reachability to server to the access list that is used to specify which hosts get NATed.




Question 4

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
On which device is the fault condition located?

  • A: R1
  • B: R2
  • C: R3
  • D: R4
  • E: DSW1
  • F: DSW2
  • G: ASW1

Correct Answer: A

On R1,  we need to permit IP 209.65.200.222/30 under the access list.




Question 5

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
The fault condition is related to which technology?

  • A: BGP
  • B: NTP
  • C: IP NAT
  • D: IPv4 OSPF Routing
  • E: IPv4 OSPF Redistribution
  • F: IPv6 OSPF Routing
  • G: IPv4 layer 3 security

Correct Answer: G

On R1,  we need to permit IP 209.65.200.222/30 under the access list.




Question 6

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
What is the solution to the fault condition?

  • A: Under the interface Serial0/0/1 enter the ip access-group edge_security out command.
  • B: Under the ip access-list extended edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command.
  • C: Under the ip access-list extended edge_security configuration delete the deny ip 10.0.0.0.0 0.255.255.255 any command.
  • D: Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access-group edge_security out command.

Correct Answer: B

On R1,  we need to permit IP 209.65.200.222/30 under the access list.




Question 7

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
The fault condition is related to which technology?

  • A: NTP
  • B: Switch-to-Switch Connectivity
  • C: Access Vlans
  • D: Port Security
  • E: VLAN ACL / Port ACL
  • F: Switch Virtual Interface

Correct Answer: D

Port security is causing the connectivity issues.  On ASW1, we need to remove port-security under interface fa1/0/1 & fa1/0/2.




Question 8

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
What is the solution to the fault condition?

  • A: In Configuration mode, using the interface range Fa 1/0/1 – 2, then no switchport port-security interface configuration commands. Then in exec mode clear errdisable interface fa 1/01 – 2 vlan 10 command
  • B: In Configuration mode, using the interface range Fa 1/0/1 – 2, then no switchport port-security, followed by shutdown, no shutdown interface configuration commands.
  • C: In Configuration mode, using the interface range Fa 1/0/1 – 2, then no switchport port-security interface configuration commands.
  • D: In Configuration mode, using the interface range Fa 1/0/1 – 2, then no switchport port-security interface configuration commands. Then in exec mode clear errdisable interface fa 1/0/1, then clear errdisable interface fa 1/0/2 commands.

Correct Answer: B

On ASW1, we need to remove port-security under interface fa1/0/1 & fa1/0/2.




Question 9

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
On which device is the fault condition located?

  • A: R1
  • B: R2
  • C: R3
  • D: R4
  • E: DSW1
  • F: DSW2
  • G: ASW1
  • H: ASW2

Correct Answer: G

port security needs is configured on ASW1.




Question 10

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
On which device is the fault condition located?

  • A: R1
  • B: R2
  • C: R3
  • D: R4
  • E: DSW1
  • F: DSW2
  • G: ASW1
  • H: ASW2

Correct Answer: D

On R4, in the redistribution of EIGRP routing protocol, we need to change name of route-map to resolve the issue.  It references route-map OSPF_to_EIGRP but the actual route map is called OSPF->EIGRP.










CONNECT US

Facebook

Twitter

PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount!



HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files