Download Implementing Cisco Data Center Infrastructure.pass4sures.300-165.2019-02-03.1e.162q.vcex

Download Dump

File Info

Exam Implementing Cisco Data Center Infrastructure
Number 300-165
File Name Implementing Cisco Data Center Infrastructure.pass4sures.300-165.2019-02-03.1e.162q.vcex
Size 7.36 Mb
Posted February 03, 2019
Downloaded 1



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase

Coupon: MASTEREXAM
With discount: 20%

 
 



Demo Questions

Question 1

switch# configure terminal 
switch (config) #  interface ethernet 1/4 
switch (config-if) #  switchport mode trunk 
switch (config-if) #  channel-group 1 mode active 
Refer to the exhibit. Which type of port channel was created?

  • A: LACP
  • B: static
  • C: PAgP
  • D: desirable

Correct Answer: A




Question 2

Which statement about electronic programmable logic device image upgrades is true?

  • A: An EPLD upgrade must be performed during an ISSU system or kickstart upgrade.
  • B: EPLD and ISSU image upgrades are nondisruptive.
  • C: Whether the module being upgraded is online pr offline only the EPLD images that have different current and new versions are upgraded.
  • D: You can execute an upgrade or downgrade only from the active supervisor module.

Correct Answer: D

Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_0/epld/release/notes/epld_rn.html




Question 3

You plan to configure authentication for OSPF. In which configuration mode should you configure OSPF authentication to use a specific key chain?

  • A: router ospf
  • B: global
  • C: vPC
  • D: interface

Correct Answer: D

Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/unicast/configuration/guide/l3_cli_nxos/l3_ospf.html




Question 4

Which GLBL load-balancing method ensures that a client is always mapped to the same virtual MAC address?

  • A: host-dependent
  • B: vmac-weighted
  • C: dedicated-vmac-mode
  • D: shortest-path and weighting

Correct Answer: A

Reference: http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-services/product_data_sheet0900aecd803a546c.html




Question 5

Which two features are required to implement a Layer 3 VXLAN gateway on the Cisco Nexus 5600 Series platform? (Choose two.)

  • A: feature mpls
  • B: feature nv overlay
  • C: feature lldp
  • D: feature eigrp
  • E: feature vn-segment-vlan-based

Correct Answer: AE

Reference: http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r5-3/lxvpn/configuration/guide/b-l3vpn-cg53xasr9k/b-l3vpn-cg53xasr9k_chapter_0111.pdf




Question 6

You experience an issue on a Cisco Nexus 7700 Series switch. You must gather detailed information about the system state and the configuration of the switch. Which command should you run?

  • A: switch# show logging > bootflash:Log.txt
  • B: switch# show tech-support > bootflash:Log.txt
  • C: switch# show running-config > bootflash:Log.txt
  • D: switch# show system > bootflash:Log.txt

Correct Answer: B




Question 7

ipv6 access-list MY_ACL 
permit tcp 2001:cc1e:aaaa::/64 2001:cc1e:befe:cccc::/64
permit udp 2001:cc1e:bbbb::/64 2001:cc1e:befe:cccc::/64
interface ethernet 1/1 
ipv6 address 2001:cc1e:befe:cccc::1/64
ipv6 traffic-filter MY_ACL in 
Refer to the exhibit. Only the ACL in the exhibit is applied on a VDC, and only the default VRF is used. In which two scenarios is traffic permitted? 
(Choose two.)

  • A: TCP traffic from 2001:cc1e:aaaa::/64 to 2001:cc1e:befe:cccc:abcd/64
  • B: GRE traffic from 2001:cc1e:befe:cccc::abcd/64 to 2001:cc1e:aaaa/64
  • C: UDP traffic from 2001:cc1e:aaaa::/64 to 2001::cc1e:befe:cccc::abcd/64
  • D: GRE traffic from 2001:cc1e:bbbb::/64 to 2001:cc1e:befe:cccc::abcd/64
  • E: TCP traffic from 2001:cc1e:bbbb::/64 to 2001:cc1e:befe:cccc:abcd/64

Correct Answer: AD




Question 8

Which two options should you consider when you configure a SAN zone set? (Choose two.)

  • A: VSANs can be activated by using enhanced zoning.
  • B: A SAN zone set consists of one or more SAN zones.
  • C: A SAN zone set must be activated manually on all of the fabric nodes.
  • D: Only the SAN zone set can be activated simultaneously.
  • E: One SAN zone can be the member of only one zone set.

Correct Answer: BC

Reference: https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/san-os/quick/guide/qcg_zones.pdf




Question 9

Which technology is required in the underlay to facilitate remote VTEP discovery?

  • A: multicast
  • B: VXLAN
  • C: OSPF
  • D: BGP

Correct Answer: A




Question 10

Which command should you ran to distribute NTP configuration changes by using Cisco Fabric Services?

  • A: ntp distribute
  • B: ntp server 1.2.3.4
  • C: ntp commit
  • D: ntp authenticate

Correct Answer: A

Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_2cfs.html#wp1419346










CONNECT US

Facebook

Twitter

PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount!



HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files