File Info
| Exam | Implementing Cisco Data Center Infrastructure |
| Number | 300-165 |
| File Name | Implementing Cisco Data Center Infrastructure.test-king.300-165.2018-08-07.1e.145q.vcex |
| Size | 4.25 Mb |
| Posted | August 07, 2018 |
| Downloads | 42 |
| Download | Implementing Cisco Data Center Infrastructure.test-king.300-165.2018-08-07.1e.145q.vcex |
How to open VCEX & EXAM Files?
Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.
Coupon: MASTEREXAM
With discount: 20%
Demo Questions
Which LISP component provides connectivity between LISP and non-LISP sites?
- A: a map resolver
- B: a proxy ETR
- C: a proxy ITR
- D: an ALT
Correct Answer: C
Which two Nexus family linecards allow the configuration of features regarding LISP, OTV and MPLS? (Choose two.)
- A: B1
- B: F3
- C: F2
- D: F1
- E: M2
Correct Answer: BC
https://www.cisco.com/c/dam/global/da_dk/assets/training/seminaria-materials/CiscoVirtualUpdate-Nexus7000and7700.pdf
Which security feature is only supported on the Cisco Nexus 7000 Series Switch?
- A: Dynamic ARP Inspection
- B: NAC
- C: CoPP
- D: IP source guard
Correct Answer: B
After enabling strong, reversible 128-bit Advanced Encryption Standard password type-6 encryption on a Cisco Nexus 7000, which command would convert existing plain or weakly encrypted passwords to type-6 encrypted passwords?
- A: switch# encryption re-encrypt obfuscated
- B: switch# encryption decrypt type6
- C: switch# key config-key ascii
- D: switch(config)# feature password encryption aes
Correct Answer: A
Instructions
This task does not require device configuration.
Click Cisco Nexus 5548 to gain console access. No console or enable passwords are required.
To access the multiple-choice questions, click the numbered boxes on the left of the top panel.
There are four multiple-choice questions with this task.
Scenario
Customer is deploying Cisco Nexus 5548 switch with FCoE in their new data center, as shown in the topology diagram. ClickNexus 5548 icon to run show commands and answer the questions.
What is the status of FCoE license on Cisco Nexus 5548 switch?
- A: FCoE license is not installed
- B: FCoE license is installed, but it is expired
- C: FCoE license is installed and status is enabled
- D: FCoE license does not need to be installed because it is part of ENTERPRISE_PKG
Correct Answer: C
Instructions
This task does not require device configuration.
Click Cisco Nexus 5548 to gain console access. No console or enable passwords are required.
To access the multiple-choice questions, click the numbered boxes on the left of the top panel.
There are four multiple-choice questions with this task.
Scenario
Customer is deploying Cisco Nexus 5548 switch with FCoE in their new data center, as shown in the topology diagram. Click Nexus5548 icon to run show commands and answer the questions.
Ethernet interface 1/5 on Cisco Nexus 5548 is connected to Cisco UCS C220 rack server. What is the status of Ethernet 1/5 interface for FCoE functionality?
- A: Interface reset on Ethernet 1/5 is preventing the FCoE connection from coming up
- B: MTU size of 1500 on Ethernet interface 1/5 needs to be changed for FCoE to come UP
- C: Cisco Nexus 5548 needs a layer 3 daughter card for FCoE to come UP on the Ethernet interface 1/5
- D: Ethernet interface 1/5 is operational for FCoE and the status is UP
Correct Answer: D
Instructions
This task does not require device configuration.
Click Cisco Nexus 5548 to gain console access. No console or enable passwords are required.
To access the multiple-choice questions, click the numbered boxes on the left of the top panel.
There are four multiple-choice questions with this task.
Scenario
Customer is deploying Cisco Nexus 5548 switch with FCoE in their new data center, as shown in the topology diagram. Click Nexus5548 icon to run show commands and answer the questions.
What is the status of FC interface associated with ethernet 1/5 indicate?
- A: Trank VSAN 11 is isolated
- B: Interface vfc 5 is up and running for the assigned VSAN
- C: Trunk VSAN 11 is initializing
- D: VSAN to FC mapping is not working as expected
Correct Answer: B
Instructions
This task does not require device configuration.
Click Cisco Nexus 5548 to gain console access. No console or enable passwords are required.
To access the multiple-choice questions, click the numbered boxes on the left of the top panel.
There are four multiple-choice questions with this task.
Scenario
Customer is deploying Cisco Nexus 5548 switch with FCoE in their new data center, as shown in the topology diagram. Click Nexus5548 icon to run show commands and answer the questions.
When configuring FCoE VLANs and Virtual Fiber Channel (vFC) Interfaces, what guidelines must be followed?
- A: Each vFC interface must be bound to an FCoE-enabled Ethernet or EtherChannel interface or to the MAC address of a remotely connected adapter
- B: Each FC interface must be bound to an FCoE-enabled Ethernet or EtherChannel interface or to the MAC address of a remotely connected adapter
- C: Each vFC interface must be bound to an FC enabled Ethernet or EtherChannel interface or to the MAC address of a remotely connected adapter
- D: Each vFC interface must be bound to an FCoE-enabled vFC or EtherChannel interface or to the MAC address of a remotely connected adapter
Correct Answer: A
You have two Cisco Nexus 7700 Series switches named SwitchA and SwitchB. You use the Rapid PVST+ protocol.
You must configure the switches as the STP root switches for VLANs 100 to 200. Which command set should you run?
- A: SwitchA(config)# spanning-tree vlan 100-200 priority 61440
SwitchB(config)# spanning-tree vlan 100-200 priority 61440 - B: SwitchA(config-if)# spanning-tree guard root
SwitchB(config-if)# spanning-tree guard root - C: SwitchA(config-if)# spanning-tree cost 100
SwitchB(config-if)# spanning-tree cost 100 - D: SwitchA(config)# spanning-tree vlan 100-200 root primary
SwitchB(config)# spanning-tree vlan 100-200 root secondary
Correct Answer: D
Which action limits the maximum number of routes that are allowed in the routing table?
- A: Use a BGP filter.
- B: Use only static routes.
- C: Use the maximum routes command inside address family.
- D: Use a route map to filter routes.
Correct Answer: C
