Download Implementing Cisco Data Center Infrastructure.test4prep.300-165.2018-11-22.1e.159q.vcex

You have a Cisco Nexus 5000 Series switch. Port security is configured to use sticky learning. Where are the secured MAC addresses stored?

• A: the running configuration
• B: the startup configuration
• C: NVRAM
• D: RAM

Correct Answer: C

Which two issues explain why a packet is not being routed as desired in a policy-based routing configuration? (Choose two.)

• A: The next hop that is configured in the route map has a higher metric than the default next hop.
• B: The route map is not applied to the egress interface.
• C: The next hop that is configured in the route map is not in the global routing table.
• D: The route map is not applied to the ingress interface.
• E: The next hop that is configured in the route map has a lower metric than the default next hop.

Correct Answer: CE

Which option must be enabled to implement manual MACsec?

• A: CTS and dot1x
• B: MSDP and dot1x
• C: CTS and MSDP
• D: CTS and private VLAN

Correct Answer: A

Which two protocols can be used to back up the configuration of a Cisco Nexus 5600 Series switch to a remote location? (Choose two.)

• A: NFS
• B: SCP
• C: SMB
• D: CIFS
• E: SFTP

Correct Answer: BE

Which two options accurately describe the implementation of Fibre Channel domain IDs? (Choose two.)

• A: are assigned on a per-line card basis
• B: must be unique on all of the Fibre Channel switches in the fabric
• C: are assigned on a per switch basis
• D: are assigned on a per-VSAN basis
• E: must be the same on all of the Fibre Channel switches in the fabric

Correct Answer: BC

Which LISP component provides connectivity between LISP and non-LISP sites?

• A: a map resolver
• B: a proxy ETR
• C: a proxy ITR
• D: an ALT

Correct Answer: C

Which two Nexus family linecards allow the configuration of features regarding LISP, OTV and MPLS? (Choose two.)

• A: B1
• B: F3
• C: F2
• D: F1
• E: M2

Correct Answer: BC

 
 
https://www.cisco.com/c/dam/global/da_dk/assets/training/seminaria-materials/CiscoVirtualUpdate-Nexus7000and7700.pdf

Which security feature is only supported on the Cisco Nexus 7000 Series Switch?

• A: Dynamic ARP Inspection
• B: NAC
• C: CoPP
• D: IP source guard

Correct Answer: B

After enabling strong, reversible 128-bit Advanced Encryption Standard password type-6 encryption on a Cisco Nexus 7000, which command would convert existing plain or weakly encrypted passwords to type-6 encrypted passwords?

• A: switch# encryption re-encrypt obfuscated
• B: switch# encryption decrypt type6
• C: switch# key config-key ascii
• D: switch(config)# feature password encryption aes

Correct Answer: A

Instructions 
This task does not require device configuration. 
Click Cisco Nexus 5548 to gain console access. No console or enable passwords are required. 
To access the multiple-choice questions, click the numbered boxes on the left of the top panel. 
There are four multiple-choice questions with this task. 
Scenario 
Customer is deploying Cisco Nexus 5548 switch with FCoE in their new data center, as shown in the topology diagram. ClickNexus 5548 icon to run show commands and answer the questions. 

• A: FCoE license is not installed
• B: FCoE license is installed, but it is expired
• C: FCoE license is installed and status is enabled
• D: FCoE license does not need to be installed because it is part of ENTERPRISE_PKG

Correct Answer: C