Download Cisco.PracticeDumps.300-175.2018-04-11.1e.156q.vcex

Which description of an import operation in Cisco UCS Manager is true?

• A: You can perform an import while the system is up and running.
• B: You can import only a configuration file that was exported from the same Cisco UCS Manager.
• C: You can import a configuration from a higher release to a lower release.
• D: You can schedule an import operation.

Correct Answer: A

When a configuration change requires a reboot, which policy specifies how Cisco UCS manager should proceed?

• A: host firmware policy
• B: local disk policy
• C: maintenance policy
• D: boot policy

Correct Answer: C

You are creating service profiles for a Cisco UCS system by using the service profile wizard. You discover that you forgot to create the UUID pool. 
What should you do?

• A: From the wizard, click Create UUID Suffix Pool.
• B: Pause the running wizard, and then start a temporary wizard to create a profile with the same name and the missing UUID pool. Resume the wizard, and then select the new UUID pool.
• C: Continue running the wizard. The service profile uses the burned-in UUID in the BIOS of the server.
• D: Stop the wizard, and then restart the wizard.

Correct Answer: A

Which two features in Cisco UCS Manager are required to configure Uplink Ethernet ports? (Choose two.)

• A: vNIC templates
• B: LAN Pin Groups
• C: VLAN groups
• D: adapter policies
• E: link profiles

Correct Answer: AB

You need to design and implement a Cisco UCS 5108 Blade Server Chassis system for a customer. 
Which statement about how half-width blades and full-width blades can be used is true?

• A: Only two full-width blades can be installed in the top two slots, and four half-width blades can be installed in the bottom two slots.
• B: Only one full-width blade can be installed in the top slot, and six half-width blades can be installed in the bottom slots.
• C: Half-width blades and full-width blades can be combined in any order.
• D: Half-width blade types and full-width blade types cannot be combined.

Correct Answer: C

Before upgrading a Cisco UCS cluster. you need to verify the high-availability statue and roles of the cluster. 
In which scenario can you successfully perform the upgrade'?

• A: When you check the Cisco UCS Manager GUI, the Ready field value is Ready and the State field value is On. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both ON and the cluster state is HA WAITING.
• B: When you check the Cisco UCS Manager GUI, the Ready field value is Yes and the State field value is Up. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both UP and the cluster state is HA READY.
• C: When you check the Cisco UCS Manager GUI, the Ready field value is Ready and the State field value is Active. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both READY and the cluster state is HA WAITING.
• D: When you check the Cisco UCS Manager GUI, the Ready field value is Ready and the State field value is Up. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both UP and the cluster state is HA UP.

Correct Answer: B

When you check the Cisco UCS Manager GUI, the Ready field value is Yes and the State field value is Up. 
When you check the Cisco UCS Manager CLl, the Primary and Secondary interconnect state are both UP and the cluster state is HA READY. 
Reference: 
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-2/b_GUI_Firmware_Management_22/b_GUI_Firmware_Management_22_chapter_011.pdf
 

   

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware-Mgmt/3-1/b_UCSM_CLI_Firmware_Management_Guide_3_1/b_UCSM_GUI_Firmware_Management_Guide_3_1_chapter_010.html#task_F5AC1A117B4F499D9DCFC221E2BC20AB
UCS-A# show cluster state 
Cluster Id: 0x4432f72a371511de-0xb97c000de1dbada4
A; UP, PRIMARY 
B: UP, SUBORDINATE
HA READY

Which destination(s) are valid for syslog messages for a Cisco UCS Fabric Interconnect?

• A: the log, the monitor and syslog queue
• B: a file
• C: the console and log only
• D: the console, the monitor, and a file

Correct Answer: D

You plan to use AAA security services for a Cisco UCS Fabric Interconnect. 
Which two authentication protocols can you use? (Choose two.)

• A: NTLM
• B: Kerberos
• C: RADIUS
• D: Diameter
• E: LDAP

Correct Answer: CE

You need to identify which DCB standard provides these functionalities: negotiation capabilities for features, the distribution of parameters from one node to another, and logical link up and down signaling for both Ethernet and Fibre Channel interfaces.
Which DCB standard should you identify?

• A: ETS
• B: PFC
• C: DCBX
• D: QCN

Correct Answer: C

You configure FCoE in a Cisco UCS system at a customer site. The configuration seems correct, but the customer complains that the system fails to perform as expected. FCoE VLAN discovery, FCF discovery and FLOGI processes work properly. The issue appears to be with the Fibre Channel commands and responses. 
What is a possible cause of the issue?

• A: The storage device is experiencing configuration or compatibility issues when the FIP process completes successfully.
• B: The routed Layer 3 network between the FCoE SAN and the storage device is experiencing issues when the FIP process fails to complete successfully.
• C: The FCoE configuration is experiencing errors because of issues with the Fibre Channel commends.
• D: The switched Layer 2 network between the FCoE SAN and the storage device is experiencing issues when the FIP process fails to complete successfully.

Correct Answer: D