Download Cisco.PracticeDumps.400-051.2018-01-04.1e.426q.vcex

Download Exam

File Info

Exam CCIE Collaboration Written Exam v1.1
Number 400-051
File Name Cisco.PracticeDumps.400-051.2018-01-04.1e.426q.vcex
Size 25.18 Mb
Posted January 04, 2018
Downloads 22
Download Cisco.PracticeDumps.400-051.2018-01-04.1e.426q.vcex

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase

Coupon: MASTEREXAM
With discount: 20%



 
 



Demo Questions

Question 1

Company ABC is planning to migrate from MCS-hosted Cisco Unified Communications Manager applications to Cisco UC on UCS B-Series servers. 
Which statement about installation media support is true for this migration?

  • A: The install log can be written to a USB flash drive that is attached to the UCS server.
  • B: The answer file that is generated by the Answer File Generator (platformConfig.xml) can be read from a USB flash drive to perform an unattended installation on the UCS server.
  • C: The Cisco Music on Hold USB audio sound card can be mapped to a virtual USB port on a VMware virtual machine on the UCS server.
  • D: The answer file that is generated by the Answer File Generator (platformConfig.xml) can be read from an FLP image that is mounted in a virtual floppy drive.
  • E: The Cisco Music on Hold USB audio sound card can be mapped to a virtual serial port on a VMware virtual machine on the UCS server.

Correct Answer: D

Using the AFG will allow you to get this license mac before even touching the server. It is provided after filling in the main form of the AFG but it can also be found by looking at the last few lines of your platformconfig.xml file. 
Once you have the xml files, you will need to map those to the floppy drive of the VM (no usb support on the VM OVA). There are many ways to do this. I simply use a freeware virtual floppy app that I drop the platformconfig.xml file on and then copy the*.flp image out to the datastore. I’ll end up with a directory on my datastore called AFG that has the host named *.flp images that I will use during install. It also serves as archival of these files in the event the server needs to be re-imaged. This is important because the license mac will change if every parameter is not entered exactly as it was prior. If the license mac changes, you will have to go through the process of requesting new license files to be generated. 
References: http://angryciscoguy.com/jello/cisco-answer-file-generator-to-the-rescue/




Question 2

Which statement about the Cisco UC on UCS TRC and the third-party server specs-based virtualization support model is true?

  • A: Both the UC on UCS TRC and the third-party servers spec-based support models have rule-based approaches.
  • B: The UC on UCS TRC support model has a rule-based approach and the third-party servers spec-based support model has a configuration-based approach.
  • C: The UC on UCS TRC support model requires a high level of virtualization experience while the third-party server spec-based support model requires a low to medium level virtualization experience.
  • D: VMware vCenter is mandatory for the UC on UCS TRC support model but it is optional for the third-party server spec-based support model.
  • E: VMware vCenter is optional for the UC on UCS TRC support model but it is mandatory for the third-party server spec-based support model.

Correct Answer: E

VMware vCenter is 
optional when deploying on UC on UCS Tested Reference Configuration hardware 
mandatory when deploying on UC on UCS Specs-based and Third-party Server Specs-based hardware. 
vCenter Statistics Level 4 logging is mandatory so that Cisco TAC is able to provide effective support. 
Click here for how to configure VMware vCenter to capture these logs. If not configured by default, Cisco TAC may request enabling these settings in order to provide effective support. 
Also note that enablement of specific VMware vSphere management features may require vCenter and/or a higher feature Edition of vSphere ESXi. 
Cisco Collaboration does not require its own dedicated vCenter. 
Note that when VMware vCenter is not required and is not used, then VMware vSphere ESXi's default management interface is its free/included VMware vSphere Client (formerly branded VI Client). 
Reference: http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements




Question 3

Which definition is included in a Cisco UC on UCS TRC?

  • A: storage arrays such as those from EMC or NetApp, if applicable
  • B: configuration of virtual-to-physical network interface mapping
  • C: step-by-step procedures for hardware BIOS, firmware, drivers, and RAID setup
  • D: server model and local components (CPU, RAM, adapters, local storage) at the part number level
  • E: configuration settings and patch recommendations for VMware software

Correct Answer: D

What does a TRC definition include? 
Definition of server model and local components (CPU, RAM, adapters, local storage) at the orderable part number level. 
Required RAID configuration (e.g. RAID5, RAID10, etc.) - including battery backup cache or SuperCap - when the TRC uses DAS storage 
Guidance on hardware installation and basic setup (e.g. click here). 
Click here for detailed Cisco UCS server documentation regarding hardware configuration procedures. 
Configuration of Virtual-to-physical network interface mapping is design-dependent and not included in TRC definition. 
Configuration of adapters (such as Cisco VIC, 3rd-party CNA / NIC / HBA) is design-dependent and not included in TRC definition. 
Configuration settings or step by step procedures for hardware BIOS, firmware, drivers, RAID setup are not included. Click here for detailed Cisco UCS server documentation. 
Design, installation and configuration of external hardware is not included in TRC definition, such as:
Network routing and switching (e.g. routers, gateways, MCUs, ethernet/FC/FCoE switches, Cisco Catalyst/Nexus/MDS, etc.) 
QoS configuration of route/switch network devices 
Cisco UCS B-Series chassis and switching components (e.g. Cisco UCS 6100/6200, Cisco UCS 2100/2200, Cisco UCS 5100) 
Storage arrays (such as those from EMC, NetApp or other vendors) 
Configuration settings, patch recommendations or step by step procedures for VMware software are not included in TRC definition. 
Infrastructure solutions such as Vblock from Virtual Computing Environment may also be leveraged for configuration details not included in the TRC definition. 
Reference: http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#UC_on_UCS_Tested_Reference_Configurations




Question 4

Which definition is included in a Cisco UC on UCS TRC?

  • A: required RAID configuration, when the TRC uses direct-attached storage
  • B: configuration of virtual-to-physical network interface mapping
  • C: step-by-step procedures for hardware BIOS, firmware, drivers, and RAID setup
  • D: configuration settings and patch recommendations for VMware software
  • E: server model and local components (CPU, RAM, adapters, local storage) by name only; part numbers are not included because they change over time

Correct Answer: A

Definition of server model and local components (CPU, RAM, adapters, local storage) at the orderable part number level. 
Required RAID configuration (e.g. RAID5, RAID10, etc.) - including battery backup cache or SuperCap - when the TRC uses DAS storage 
Guidance on hardware installation and basic setup. 
Configuration of Virtual-to-physical network interface mapping is design-dependent and not included in TRC definition. 
Configuration of adapters (such as Cisco VIC, 3rd-party CNA / NIC / HBA) is design-dependent and not included in TRC definition. 
Design, installation and configuration of external hardware is not included in TRC definition, such as:
Network routing and switching (e.g. routers, gateways, MCUs, ethernet/FC/FCoE switches, Cisco Catalyst/Nexus/MDS, etc.) 
QoS configuration of route/switch network devices 
Cisco UCS B-Series chassis and switching components (e.g. Cisco UCS 6100/6200, Cisco UCS 2100/2200, Cisco UCS 5100) 
Storage arrays (such as those from EMC, NetApp or other vendors) 
Configuration settings, patch recommendations or step by step procedures for VMware software are not included in TRC definition. 
Infrastructure solutions such as Vblock from Virtual Computing Environment may also be leveraged for configuration details not included in the TRC definition. 
References:




Question 5

Which capability is supported by Cisco Discovery Protocol but not by LLDP-MED?

  • A: LAN speed and duplex discovery
  • B: Network policy discovery
  • C: Location identification discovery
  • D: Power discovery
  • E: Trust extension

Correct Answer: E

Cisco Discovery Protocol provides an additional capability not found in LLDP-MED that allows the switch to extend trust to the phone. In this case, the phone is now trusted to mark the packets received on the PC port accordingly. This feature can be used to off-load the switch because now it does not need to police the information being received from the phone.




Question 6

Which two mechanisms does Cisco EnergyWise use for neighbor discovery? (Choose two.)

  • A: multicast
  • B: LLDP-MED
  • C: UDP broadcast
  • D: Cisco Discovery Protocol
  • E: TCP

Correct Answer: CD

Cisco EnergyWise Neighbor Discovery Process 
The Cisco EnergyWise neighbor discovery process is the mechanism by which domain members discover each other and populate their Cisco EnergyWise neighbor tables. Cisco EnergyWise queries can subsequently be distributed to all domain members using the neighbor relationships to monitor and control the power usage of devices within a domain. Cisco EnergyWise domain members automatically discover their neighbors through one of two mechanisms:
UDP broadcast packets are automatically sent out switch ports which support Cisco EnergyWise, regardless of whether the interfaces are configured with the no energywise interface-level command. CDP packets are sent when CDP is configured for the switch ports. 
References: http://www.cisco.com/en/US/docs/solutions/Enterprise/Borderless_Networks/Energy_Management/energywisedg.html?referring_site=smartnavRD#wp555927




Question 7

Which protocol does the Cisco Prime LAN Management Solution application use to communicate with Cisco EnergyWise domain members?

  • A: UDP broadcast
  • B: Cisco Discovery Protocol
  • C: UDP unicast
  • D: TCP
  • E: multicast

Correct Answer: D

Cisco Prime LMS 4.1 uses TCP port 43440.




Question 8

Refer to the exhibit. 
 

  
  
Assuming that the administrator has never performed any manual custom uploads, which two file types can be found when you choose Software Upgrades, followed by TFTP File Management on the Cisco Unified Operating System Administration web page? (Choose two.)

  • A: IP phone configuration files
  • B: sample music-on-hold audio files
  • C: Identity Trust List files
  • D: IP phone license files
  • E: Mobile Voice Access audio files
  • F: softkey template files

Correct Answer: CE

We get option for Identity Trust list Files and Mobile Voice Access audio files.




Question 9

Which statement describes a disadvantage of using the Cisco TFTP service to serve IP phone load files?

  • A: The Cisco TFTP services can run on only one Cisco Unified Communications Manager server in a cluster.
  • B: Because TFTP operates on top of UDP, there is a high risk of corrupted load file delivery at the completion of the TFTP process due to undetected data loss in the network.
  • C: If a response is not received in the timeout period, the TFTP server will not resend the data packet.
  • D: Packet loss can significantly increase the TFTP session completion time.
  • E: Because TFTP operates with an adaptive timeout period, the time to complete the file transfer is unpredictable.

Correct Answer: D

Voice traffic cannot recapture lost packets. Rather than retransmitting a lost network connection, the phone resets and attempts to reconnect its network connection. 
References: http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/6921_6941_6961/7_1_2/english/admin/guide/6921trb.html#wp1031181




Question 10

Which two statements about using the Load Server option for IP phone firmware distribution are true? (Choose two.)

  • A: This option must be enabled on at least two servers in a Cisco Unified Communications Manager cluster.
  • B: This option must be enabled on Cisco Unified Communications Manager service parameters for Cisco TFTP.
  • C: Phone firmware must be manually copied to any applicable load servers.
  • D: The load server will not function if its IP address is not in the same subnet as the IP phones.
  • E: This option is only available for newer IP phone models.
  • F: This option does not accommodate falling back to Cisco TFTP on error.

Correct Answer: CF

Choosing the Right Distribution Method 
Which of the three different image-distribution methods discussed so far is the best for a customer deployment? Each method has advantages and disadvantages, and they are summarized in Table 1. 
Table 1. Summary of Distribution Models 
 
  

References: http://www.cisco.com/en/US/prod/collateral/voicesw/ps6882/ps6884/white_paper_c11-583891.pdf










CONNECT US

Facebook

Twitter

PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount!



HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files