Download Avaya.7693X.Prep4Sure.2019-02-22.58q.vcex

Download Exam

File Info

Exam Avaya Pod Fx Solution Support Exam
Number 7693X
File Name Avaya.7693X.Prep4Sure.2019-02-22.58q.vcex
Size 1 MB
Posted Feb 22, 2019
Download Avaya.7693X.Prep4Sure.2019-02-22.58q.vcex

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase

Coupon: MASTEREXAM
With discount: 20%






Demo Questions

Question 1

You notice that the VPFM discovery stops at the Base 500 devices after the installation of an incremental license of 2000 devices on top of the VPFM base license. 
Which action would you take first?


  1. Restart System Manager.
  2. Confirm ‘default.lic’ file exists.
  3. Restart the VPFM VM.
  4. Reinstall license.
Correct answer: C



Question 2

Which process is used to determine the current version of software running on the Pod Fx CM installation?


  1. Browser and connect to vSphere
  2. SSH and swversion command
  3. Telnet and swversion command
  4. VNC and connect to MSC
Correct answer: A



Question 3

When performing a BIOS or Firmware upgrade on physical host servers, why is it important to have vSphere access?


  1. The serve must be placed in maintenance mode during the upgrade.
  2. VMs must be shut down during the process.
  3. vSphere is needed to shut down the physical server.
  4. The VMs must be restarted during the upgrade process.
Correct answer: D



Question 4

You are receiving High Availability warnings in the vSphere client. 
To resolve the issue, what should you try first?


  1. Stop and restart VMs.
  2. Ensure Storage Array is reachable from VSP.
  3. In the cluster, check cabling between server and storage array.
  4. Right-click each Host in the cluster and select Reconfigure for HA.
Correct answer: B



Question 5

When attempting to access the Pod Orchestration Suite (POS), you want to avoid receiving error messages reporting that the Fully Qualified Domain Name (FQDN) is either not responding, or is unreachable. 
Which restriction to the FQDN must be followed?


  1. You can have no more than 35 characters.
  2. You must have a .COM or .NET extension.
  3. You must access POS via the IP address only.
  4. You must begin with the letters P-O-D.
Correct answer: A



Question 6

While attempting to perform an upgrade using PUM, you receive a File Not Found error message. 
What is the cause of this problem?


  1. The spelling and/or case are incorrect.
  2. PUM is unable to contact the device you are trying to upgrade.
  3. The files are not found in the right location.
  4. The file is not the correct version for the destination device.
Correct answer: B



Question 7

When booting up the EMC Storage Array, how long should you expect the boot up procedure to take?


  1. 10 minutes
  2. 5 minutes
  3. 20 minutes
  4. 30 minutes
Correct answer: B



Question 8

While configuring the MSC/PUM to use NTP you see the NTP synching fail. 
What is the most common cause of this problem?


  1. VMware is not supporting NTP.
  2. The VSPs are rejecting the NTP messages.
  3. The NTP server is installed outside of the Pod Fx.
  4. There is a firewall on MSC.
Correct answer: A



Question 9

When you click the VPFM link on the SMGR page an error message indicates that the page is unavailable. 
When trying to determine the cause of the issue, what would you check first?


  1. Check that the VM is reachable.
  2. Check that the VPFM service is running.
  3. Restart the VPFM server.
  4. Restart the SMGR server.
Correct answer: C



Question 10

A customer called saying vMotion is not working as expected. 
What is the first thing you should try to determine the issue?


  1. Check all physical wiring.
  2. From one of the Hosts, try to ping the vMotion VMKernel of the “Destination” Host.
  3. Place both hosts in maintenance mode, then restart once completed.
  4. Shut down and restart both hosts.
Correct answer: B



Question 11

You notice that the VPFM discovery stops at the Base 500 devices after the installation of an incremental license of 2000 devices on top of the VPFM base license. 
Which action would you take first?


  1. Restart System Manager.
  2. Confirm ‘default.lic’ file exists.
  3. Restart the VPFM VM.
  4. Reinstall license.
Correct answer: C



Question 12

Which process is used to determine the current version of software running on the Pod Fx CM installation?


  1. Browser and connect to vSphere
  2. SSH and swversion command
  3. Telnet and swversion command
  4. VNC and connect to MSC
Correct answer: A



Question 13

When performing a BIOS or Firmware upgrade on physical host servers, why is it important to have vSphere access?


  1. The serve must be placed in maintenance mode during the upgrade.
  2. VMs must be shut down during the process.
  3. vSphere is needed to shut down the physical server.
  4. The VMs must be restarted during the upgrade process.
Correct answer: D



Question 14

You are receiving High Availability warnings in the vSphere client. 
To resolve the issue, what should you try first?


  1. Stop and restart VMs.
  2. Ensure Storage Array is reachable from VSP.
  3. In the cluster, check cabling between server and storage array.
  4. Right-click each Host in the cluster and select Reconfigure for HA.
Correct answer: B



Question 15

When attempting to access the Pod Orchestration Suite (POS), you want to avoid receiving error messages reporting that the Fully Qualified Domain Name (FQDN) is either not responding, or is unreachable. 
Which restriction to the FQDN must be followed?


  1. You can have no more than 35 characters.
  2. You must have a .COM or .NET extension.
  3. You must access POS via the IP address only.
  4. You must begin with the letters P-O-D.
Correct answer: A



Question 16

While attempting to perform an upgrade using PUM, you receive a File Not Found error message. 
What is the cause of this problem?


  1. The spelling and/or case are incorrect.
  2. PUM is unable to contact the device you are trying to upgrade.
  3. The files are not found in the right location.
  4. The file is not the correct version for the destination device.
Correct answer: B



Question 17

When booting up the EMC Storage Array, how long should you expect the boot up procedure to take?


  1. 10 minutes
  2. 5 minutes
  3. 20 minutes
  4. 30 minutes
Correct answer: B



Question 18

While configuring the MSC/PUM to use NTP you see the NTP synching fail. 
What is the most common cause of this problem?


  1. VMware is not supporting NTP.
  2. The VSPs are rejecting the NTP messages.
  3. The NTP server is installed outside of the Pod Fx.
  4. There is a firewall on MSC.
Correct answer: A



Question 19

When you click the VPFM link on the SMGR page an error message indicates that the page is unavailable. 
When trying to determine the cause of the issue, what would you check first?


  1. Check that the VM is reachable.
  2. Check that the VPFM service is running.
  3. Restart the VPFM server.
  4. Restart the SMGR server.
Correct answer: C



Question 20

A customer called saying vMotion is not working as expected. 
What is the first thing you should try to determine the issue?


  1. Check all physical wiring.
  2. From one of the Hosts, try to ping the vMotion VMKernel of the “Destination” Host.
  3. Place both hosts in maintenance mode, then restart once completed.
  4. Shut down and restart both hosts.
Correct answer: B



Question 21

You notice that the VPFM discovery stops at the Base 500 devices after the installation of an incremental license of 2000 devices on top of the VPFM base license. 
Which action would you take first?


  1. Restart System Manager.
  2. Confirm ‘default.lic’ file exists.
  3. Restart the VPFM VM.
  4. Reinstall license.
Correct answer: C



Question 22

Which process is used to determine the current version of software running on the Pod Fx CM installation?


  1. Browser and connect to vSphere
  2. SSH and swversion command
  3. Telnet and swversion command
  4. VNC and connect to MSC
Correct answer: A



Question 23

When performing a BIOS or Firmware upgrade on physical host servers, why is it important to have vSphere access?


  1. The serve must be placed in maintenance mode during the upgrade.
  2. VMs must be shut down during the process.
  3. vSphere is needed to shut down the physical server.
  4. The VMs must be restarted during the upgrade process.
Correct answer: D



Question 24

You are receiving High Availability warnings in the vSphere client. 
To resolve the issue, what should you try first?


  1. Stop and restart VMs.
  2. Ensure Storage Array is reachable from VSP.
  3. In the cluster, check cabling between server and storage array.
  4. Right-click each Host in the cluster and select Reconfigure for HA.
Correct answer: B



Question 25

When attempting to access the Pod Orchestration Suite (POS), you want to avoid receiving error messages reporting that the Fully Qualified Domain Name (FQDN) is either not responding, or is unreachable. 
Which restriction to the FQDN must be followed?


  1. You can have no more than 35 characters.
  2. You must have a .COM or .NET extension.
  3. You must access POS via the IP address only.
  4. You must begin with the letters P-O-D.
Correct answer: A



Question 26

While attempting to perform an upgrade using PUM, you receive a File Not Found error message. 
What is the cause of this problem?


  1. The spelling and/or case are incorrect.
  2. PUM is unable to contact the device you are trying to upgrade.
  3. The files are not found in the right location.
  4. The file is not the correct version for the destination device.
Correct answer: B



Question 27

When booting up the EMC Storage Array, how long should you expect the boot up procedure to take?


  1. 10 minutes
  2. 5 minutes
  3. 20 minutes
  4. 30 minutes
Correct answer: B



Question 28

While configuring the MSC/PUM to use NTP you see the NTP synching fail. 
What is the most common cause of this problem?


  1. VMware is not supporting NTP.
  2. The VSPs are rejecting the NTP messages.
  3. The NTP server is installed outside of the Pod Fx.
  4. There is a firewall on MSC.
Correct answer: A



Question 29

When you click the VPFM link on the SMGR page an error message indicates that the page is unavailable. 
When trying to determine the cause of the issue, what would you check first?


  1. Check that the VM is reachable.
  2. Check that the VPFM service is running.
  3. Restart the VPFM server.
  4. Restart the SMGR server.
Correct answer: C



Question 30

A customer called saying vMotion is not working as expected. 
What is the first thing you should try to determine the issue?


  1. Check all physical wiring.
  2. From one of the Hosts, try to ping the vMotion VMKernel of the “Destination” Host.
  3. Place both hosts in maintenance mode, then restart once completed.
  4. Shut down and restart both hosts.
Correct answer: B



Question 31

You notice that the VPFM discovery stops at the Base 500 devices after the installation of an incremental license of 2000 devices on top of the VPFM base license. 
Which action would you take first?


  1. Restart System Manager.
  2. Confirm ‘default.lic’ file exists.
  3. Restart the VPFM VM.
  4. Reinstall license.
Correct answer: C



Question 32

Which process is used to determine the current version of software running on the Pod Fx CM installation?


  1. Browser and connect to vSphere
  2. SSH and swversion command
  3. Telnet and swversion command
  4. VNC and connect to MSC
Correct answer: A



Question 33

When performing a BIOS or Firmware upgrade on physical host servers, why is it important to have vSphere access?


  1. The serve must be placed in maintenance mode during the upgrade.
  2. VMs must be shut down during the process.
  3. vSphere is needed to shut down the physical server.
  4. The VMs must be restarted during the upgrade process.
Correct answer: D



Question 34

You are receiving High Availability warnings in the vSphere client. 
To resolve the issue, what should you try first?


  1. Stop and restart VMs.
  2. Ensure Storage Array is reachable from VSP.
  3. In the cluster, check cabling between server and storage array.
  4. Right-click each Host in the cluster and select Reconfigure for HA.
Correct answer: B



Question 35

When attempting to access the Pod Orchestration Suite (POS), you want to avoid receiving error messages reporting that the Fully Qualified Domain Name (FQDN) is either not responding, or is unreachable. 
Which restriction to the FQDN must be followed?


  1. You can have no more than 35 characters.
  2. You must have a .COM or .NET extension.
  3. You must access POS via the IP address only.
  4. You must begin with the letters P-O-D.
Correct answer: A



Question 36

While attempting to perform an upgrade using PUM, you receive a File Not Found error message. 
What is the cause of this problem?


  1. The spelling and/or case are incorrect.
  2. PUM is unable to contact the device you are trying to upgrade.
  3. The files are not found in the right location.
  4. The file is not the correct version for the destination device.
Correct answer: B



Question 37

When booting up the EMC Storage Array, how long should you expect the boot up procedure to take?


  1. 10 minutes
  2. 5 minutes
  3. 20 minutes
  4. 30 minutes
Correct answer: B



Question 38

While configuring the MSC/PUM to use NTP you see the NTP synching fail. 
What is the most common cause of this problem?


  1. VMware is not supporting NTP.
  2. The VSPs are rejecting the NTP messages.
  3. The NTP server is installed outside of the Pod Fx.
  4. There is a firewall on MSC.
Correct answer: A



Question 39

When you click the VPFM link on the SMGR page an error message indicates that the page is unavailable. 
When trying to determine the cause of the issue, what would you check first?


  1. Check that the VM is reachable.
  2. Check that the VPFM service is running.
  3. Restart the VPFM server.
  4. Restart the SMGR server.
Correct answer: C



Question 40

A customer called saying vMotion is not working as expected. 
What is the first thing you should try to determine the issue?


  1. Check all physical wiring.
  2. From one of the Hosts, try to ping the vMotion VMKernel of the “Destination” Host.
  3. Place both hosts in maintenance mode, then restart once completed.
  4. Shut down and restart both hosts.
Correct answer: B









CONNECT US

Facebook

Twitter

PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount!



HOW TO OPEN VCEX FILES

Use ProfExam Simulator to open VCEX files