Download Checkpoint.156-836.VCEDumps.2024-03-26.36q.vcex

Download Exam

File Info

Exam Check Point Certified Maestro Expert - R81.X
Number 156-836
File Name Checkpoint.156-836.VCEDumps.2024-03-26.36q.vcex
Size 30 KB
Posted Mar 26, 2024
Download Checkpoint.156-836.VCEDumps.2024-03-26.36q.vcex


How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase

Coupon: MASTEREXAM
With discount: 20%






Demo Questions

Question 1

Maestro allows running commands globally in Expert mode by using global prefixes, such as:


  1. asg all
  2. g_all
  3. all
  4. global
Correct answer: B
Explanation:
The g_all prefix is used to run commands globally in Expert mode on all Security Group Members of the current Security Group. For example, g_all cpstop will stop the Check Point services on all SGMs. The other prefixes are not valid for global commands in Expert mode.Reference* Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 4: Using the Command Line Interface and WebUI, Lesson 4.3: Global Commands, page 4-11* Check Point R81 Maestro Administration Guide, Chapter 4: Using the Command Line Interface and WebUI, Section: Global Commands, page 4-9* Global Expert Mode Commands - Check Point CheckMates
The g_all prefix is used to run commands globally in Expert mode on all Security Group Members of the current Security Group. For example, g_all cpstop will stop the Check Point services on all SGMs. The other prefixes are not valid for global commands in Expert mode.
Reference
* Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 4: Using the Command Line Interface and WebUI, Lesson 4.3: Global Commands, page 4-11
* Check Point R81 Maestro Administration Guide, Chapter 4: Using the Command Line Interface and WebUI, Section: Global Commands, page 4-9
* Global Expert Mode Commands - Check Point CheckMates



Question 2

The ______________ command will allow users to update the specified file on all SGMs.


  1. g_update_conf_file
  2. g_all'
  3. sed
  4. g_cat
Correct answer: A
Explanation:
The g_update_conf_file command is a global command that allows users to update the specified file on all Security Group Members of the current Security Group. The command takes the file name and the parameter-value pair as arguments and updates the file accordingly. For example, g_update_conf_file fwkern.conf fwha_enable_arp=1 will add or modify the fwha_enable_arp parameter in the fwkern.conf file on all SGMs.Reference* Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 4: Using the Command Line Interface and WebUI, Lesson 4.3: Global Commands, page 4-12* Check Point R81 Maestro Administration Guide, Chapter 4: Using the Command Line Interface and WebUI, Section: Global Commands, page 4-10* Maestro Commands for Security Groups - Check Point CheckMates
The g_update_conf_file command is a global command that allows users to update the specified file on all Security Group Members of the current Security Group. The command takes the file name and the parameter-value pair as arguments and updates the file accordingly. For example, g_update_conf_file fwkern.conf fwha_enable_arp=1 will add or modify the fwha_enable_arp parameter in the fwkern.conf file on all SGMs.
Reference
* Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 4: Using the Command Line Interface and WebUI, Lesson 4.3: Global Commands, page 4-12
* Check Point R81 Maestro Administration Guide, Chapter 4: Using the Command Line Interface and WebUI, Section: Global Commands, page 4-10
* Maestro Commands for Security Groups - Check Point CheckMates



Question 3

What happens when you make changes from Clish on the SMO Master?


  1. The changes are synchronized to the SMS/MDS as a backup.
  2. The changes are synchronized to the MHO as a backup.
  3. Changes are only applied on the SMO Master.
  4. Changes are applied to all members in the SG.
Correct answer: C
Explanation:
Reference* Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 2: Maestro Security Groups, Lesson 2.2: Security Group Configuration, page 2-10* Check Point R81 Maestro Administration Guide, Chapter 2: Maestro Security Groups, Section: Security Group Configuration, page 2-9* Security Group Configuration - Check Point Software
Reference
* Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 2: Maestro Security Groups, Lesson 2.2: Security Group Configuration, page 2-10
* Check Point R81 Maestro Administration Guide, Chapter 2: Maestro Security Groups, Section: Security Group Configuration, page 2-9
* Security Group Configuration - Check Point Software



Question 4

What type of license is required for an MHO?


  1. The MHO requires a NGTP license.
  2. The MHO requires a VSX license.
  3. The MHO does not require a license.
  4. A license is needed for each attached SGM.
Correct answer: C
Explanation:
The MHO (Maestro Hyperscale Orchestrator) does not require a license by itself, but each SGM (Security Group Module) that is attached to the MHO needs a license. The license type depends on the features and blades that are enabled on the SGM. For example, if the SGM is running VSX, it needs a VSX license.* Maestro Expert (CCME) Course - Check Point Software, page 71* Check Point Certified Maestro Expert (CCME) R81.X - Global Knowledge, course outline
The MHO (Maestro Hyperscale Orchestrator) does not require a license by itself, but each SGM (Security Group Module) that is attached to the MHO needs a license. The license type depends on the features and blades that are enabled on the SGM. For example, if the SGM is running VSX, it needs a VSX license.
* Maestro Expert (CCME) Course - Check Point Software, page 71
* Check Point Certified Maestro Expert (CCME) R81.X - Global Knowledge, course outline



Question 5

What Maestro component acts as a load balancer and network switch?


  1. Security Switching Module (SSM)
  2. Maestro Hyperscale Orchestrator (MHO)
  3. Security Group (SG)
  4. Security Gateway Module (SGM)
Correct answer: B
Explanation:
* The Quantum Maestro Orchestrator uses the Distribution Mode to assign incoming traffic to Security Group Members.Reference: Working with the Distribution Mode
* The Quantum Maestro Orchestrator uses the Distribution Mode to assign incoming traffic to Security Group Members.
Reference: Working with the Distribution Mode



Question 6

What is an uplink interface used for?


  1. To connect in between appliances
  2. To connect appliances to customer's infrastructure
  3. To connect Orchestrators to customer's infrastructure
  4. To connect in between Orchestrators
Correct answer: C
Explanation:
Uplink interfaces are used to connect Maestro Hyperscale Orchestrators (MHOs) to the customer's network infrastructure, such as switches, routers, or firewalls. They are also used to send and receive management and control traffic from the customer's network to the MHOs.* Maestro Expert (CCME) Course - Check Point Software, page 41* Check Point Certified Maestro Expert (CCME) R81.X - Global Knowledge, course outline
Uplink interfaces are used to connect Maestro Hyperscale Orchestrators (MHOs) to the customer's network infrastructure, such as switches, routers, or firewalls. They are also used to send and receive management and control traffic from the customer's network to the MHOs.
* Maestro Expert (CCME) Course - Check Point Software, page 41
* Check Point Certified Maestro Expert (CCME) R81.X - Global Knowledge, course outline



Question 7

When working with Maestro, what is the difference between using Clish and gClish?


  1. Clish commands are for testing purposes only and cannot be saved, gClish commands apply to all SG members, by default.
  2. Clish commands apply to all UP SG members, by default. gClish commands apply to all SG members, by default.
  3. Clish commands are run on the SG members. gClish commands are run on the MHO and applied to all connected SG members in a specified group.
  4. Clish commands apply only to a specific SG member. gClish commands apply to all UP SG members, by default.
Correct answer: C



Question 8

What cannot be learned from the output of lldpctl?


  1. Serial number of Appliance
  2. Appliance model
  3. Distribution mode
  4. Orchestrator's IP
Correct answer: C
Explanation:
The lldpctl command is a tool to display information about the devices discovered by the Link Layer Discovery Protocol (LLDP) on all ports of the Maestro Orchestrator and the Security Group Members. LLDP is a protocol that enables devices to exchange information about their identity, capabilities, and configuration. LLDP can help to discover the topology and connectivity of the Maestro environment. The output of lldpctl can show the serial number, appliance model, and orchestrator's IP of the connected devices, but it cannot show the distribution mode of the Security Group. The distribution mode is the algorithm that determines how the Maestro Orchestrator distributes the traffic among the Security Group Members. To view the distribution mode, other commands such as asg monitor or asg stat can be used.Reference* Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 4: Using the Command Line Interface and WebUI, Lesson 4.2: LLDP, page 4-9* Check Point R81 Maestro Administration Guide, Chapter 3: Working with Security Group Modules, Section: LLDP, page 3-9* Check Point R81 Maestro Administration Guide, Chapter 2: Maestro Security Groups, Section: Traffic Distribution, page 2-7* Maestro basic setup documentation - Page 2 - Check Point CheckMates* Log and Configuration Files - Check Point Software
The lldpctl command is a tool to display information about the devices discovered by the Link Layer Discovery Protocol (LLDP) on all ports of the Maestro Orchestrator and the Security Group Members. LLDP is a protocol that enables devices to exchange information about their identity, capabilities, and configuration. LLDP can help to discover the topology and connectivity of the Maestro environment. The output of lldpctl can show the serial number, appliance model, and orchestrator's IP of the connected devices, but it cannot show the distribution mode of the Security Group. The distribution mode is the algorithm that determines how the Maestro Orchestrator distributes the traffic among the Security Group Members. To view the distribution mode, other commands such as asg monitor or asg stat can be used.
Reference
* Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 4: Using the Command Line Interface and WebUI, Lesson 4.2: LLDP, page 4-9
* Check Point R81 Maestro Administration Guide, Chapter 3: Working with Security Group Modules, Section: LLDP, page 3-9
* Check Point R81 Maestro Administration Guide, Chapter 2: Maestro Security Groups, Section: Traffic Distribution, page 2-7
* Maestro basic setup documentation - Page 2 - Check Point CheckMates
* Log and Configuration Files - Check Point Software



Question 9

What is the purpose of Management ports located on the Rear Panel of the Orchestrator MHO-140?


  1. 1Gbps connectivity for Security Groups
  2. Reserved for internal purposes. Not in use.
  3. Out-of-band interfaces for access to Orchestrator itself
  4. Additional ports used as uplinks
Correct answer: C
Explanation:
The Management ports located on the Rear Panel of the Orchestrator MHO-140 are out-of-band interfaces that provide access to the Orchestrator itself for configuration and management purposes. They are not used for traffic distribution or connectivity to the Security Groups or the external networks. They are 1Gbps RJ-45 ports that can be connected to a switch or a router.Reference* Maestro Hyperscale Orchestrator Datasheet - Check Point Software1, page 2* Quantum Maestro Getting Started Guide - Check Point CheckMates2, page 4
The Management ports located on the Rear Panel of the Orchestrator MHO-140 are out-of-band interfaces that provide access to the Orchestrator itself for configuration and management purposes. They are not used for traffic distribution or connectivity to the Security Groups or the external networks. They are 1Gbps RJ-45 ports that can be connected to a switch or a router.
Reference
* Maestro Hyperscale Orchestrator Datasheet - Check Point Software1, page 2
* Quantum Maestro Getting Started Guide - Check Point CheckMates2, page 4



Question 10

There are two 10Gbps dual-port NIC installed on a 6800 appliance. Which interfaces should be connected to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators?


  1. Any pair of available ports
  2. Port 1 in Slot 1 and Port 1 in Slot 2
  3. Port 1 in Slot 1 and Port 2 in Slot 1
  4. Port 1 in Slot 2 and Port 2 in Slot 1
Correct answer: B
Explanation:
The correct interfaces to connect to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators are Port 1 in Slot 1 and Port 1 in Slot 2. This is because each slot represents a different NIC, and each port represents a different physical link. By connecting two ports from different slots, the appliance can have redundant connections to the same orchestrator, and avoid a single point of failure in case of a NIC or link failure.Reference* Check Point 156-835 Certification Flashcards | Quizlet1* Maestro Expert (CCME) Course - Check Point Software, page 182* Maestro Technical Training, Module 2: Maestro Security Groups and the Single Management Object, slide 163
The correct interfaces to connect to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators are Port 1 in Slot 1 and Port 1 in Slot 2. This is because each slot represents a different NIC, and each port represents a different physical link. By connecting two ports from different slots, the appliance can have redundant connections to the same orchestrator, and avoid a single point of failure in case of a NIC or link failure.
Reference
* Check Point 156-835 Certification Flashcards | Quizlet1
* Maestro Expert (CCME) Course - Check Point Software, page 182
* Maestro Technical Training, Module 2: Maestro Security Groups and the Single Management Object, slide 163









PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount!



HOW TO OPEN VCEX FILES

Use ProfExam Simulator to open VCEX files