File Info
| Exam | Supporting Cisco Data Center System Devices (DCTECH) |
| Number | 010-151 |
| File Name | Cisco.010-151.VCEplus.2024-08-06.88q.vcex |
| Size | 5 MB |
| Posted | Aug 06, 2024 |
| Download | Cisco.010-151.VCEplus.2024-08-06.88q.vcex |
How to open VCEX & EXAM Files?
Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.
Coupon: MASTEREXAM
With discount: 20%
Demo Questions
Question 1
Which two statements about DIMM replacement in Cisco UCS Servers are true? (Choose two.)
- In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel.
- Rack-mount and blade servers have memory fault LEDs that indicate which DIMM requires attention.
- In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on).
- If the memory in a server is not fully populated, you can install DIMMs in any open slot.
Correct answer: AC
Question 2
Which three tools are necessary to console into a Cisco UCS C-Series Rack-Mount Server? (Choose three.)
- Cisco DB-9-to-RJ-45 console cable
- laptop
- monitor
- keyboard
- KVM dongle
- USB serial adapter
Correct answer: CDE
Question 3
After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)
- Verify the power source to the equipment.
- Check for loose HDD cables.
- Reseat the DIMMs, CPU, and PCI cards.
- Verify that power supplies are receiving power.
- Reseat the mezzanine card connector.
- Check the CPU sockets for bent pins.
- Check the Cisco IMC for fan faults.
Correct answer: ACDF
Question 4
Which three firmware components does the Host Upgrade Utility upgrade? (Choose three.)
- Fabric Interconnect firmware
- LAN on Motherboard
- Cisco UCS Manager
- CIMC
- System BIOS
Correct answer: BDE
Question 5
Which three troubleshooting procedures do you perform when there is no power to a Cisco UCS B250 M2 Blade Server? (Choose three.)
- Decommission and acknowledge the blade.
- Check the back of the blade to ensure that there is no damage to the connection that goes into chassis.
- Reseat the memory DIMMs.
- Check the CPU sockets for bent pins.
- Reseat the blade in the same slot in the chassis.
- Move the blade to another slot in the chassis.
Correct answer: BEF
Question 6
Which two remote file system methods are used in the training material to transfer firmware to the Fabric Interconnect? (Choose two.)
- FTPS
- FTP
- TFTP
- RSH
Correct answer: BC
Question 7
On which three devices can the Host Upgrade Utility be performed? (Choose three.)
- C420
- C230
- B230
- B210
- C210
- B460
- C240
Correct answer: AEG
Question 8
Refer to the exhibit.
This image shows a CPU Pick-and-Place tool and a CPU Socket Protective Cap Removal tool.
Which types of Cisco UCS servers and Intel Xeon processors do these tools support?
- Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2400 Series processors
- Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2600 Series processors
- Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2400 Seriesprocessors
- Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Seriesprocessors
Correct answer: D
Question 9
When a host firmware package policy is created, what must it be associated with to upgrade the BIOS?
- blade or blade pool
- service profile
- boot policy
- service template
Correct answer: B
Question 10
Which three components are hot swappable in a Cisco UCS Blade Server and Chassis? (Choose three.)
- Fabric Extender
- Power supply
- Heat sink
- SAS Hard Drive
- 2x8GB Kit DIMMs
- Mezzanine card
Correct answer: ABD
