File Info
| Exam | Managing Industrial Networks with Cisco Networking Technologies |
| Number | 200-401 |
| File Name | Cisco.200-401.PassCertification.2019-02-21.64q.vcex |
| Size | 1 MB |
| Posted | Feb 21, 2019 |
| Download | Cisco.200-401.PassCertification.2019-02-21.64q.vcex |
How to open VCEX & EXAM Files?
Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.
Coupon: MASTEREXAM
With discount: 20%
Demo Questions
Question 1
A small manufacturing company has a Class C network address on the plant floor and needs to create five subnets, each accommodating 25 endpoints. Which subnet mask needs to be configured?
- 255.255.240.0
- 255.255.255.128
- 255.255.255.192
- 255.255.255.224
- 255.255.255.240
- 255.255.255.248
Correct answer: D
Question 2
Exhibit:
Refer to the exhibit. Host 3 on Network A is sending data to Host 8 on Network B. Which address is the default gateway of Host 3?
- the address of the switch interface that is connected to router interface Fa0/0
- the address of the switch interface that is connected to router interface Fa0/1
- the address of the host that is connected to Network A
- the address of the host that is connected to Network B
- the address of the router interface Fa0/0
- the address of the router interface Fa0/1
Correct answer: E
Question 3
Which of the following correctly pairs the dotted decimal subnet mask with the correct number of binary bits that represent the subnet mask?
- 255.255.255.192 and /25
- 255.255.255.248 and /28
- 255.255.255.224 and /26
- 255.255.255.248 and /27
- 255.255.255.240 and /28
- 255.255.255.240 and /16
Correct answer: E
Question 4
Exhibit:
Refer to the exhibit. Which port should a PLC with IP address 192.168.3.65 be plugged into in order to communicate to the rest of the network?
- FastEthernet1/1
- FastEthernet1/2
- FastEthernet1/3
- FastEthernet1/4
- FastEthernet1/5
Correct answer: C
Question 5
Which option allows an EtherNet/IP I/O device to be safely installed where it is subject to water immersion?
- The device is rated IP20 and the power wiring is installed securely to the terminal block.
- The device is rated IP67 and a power cordset is used.
- The device is rated IP67 and immersed to 10 m.
- The device is rated IP20 and immersed to 10 m.
Correct answer: B
Question 6
Exhibit:
Refer to the exhibit. What are three traffic and interconnection requirements for the devices in the exhibit? (Choose three.)
- The EtherNet/IP drive connections are in a high-voltage area and need protection from electromagnetic noise, so shielded cable that is rated for 600 V is advised.
- EtherNet/IP devices such as the controller, drive, VoIP phone, and IP camera should be in the same VLAN.
- CIP traffic has the highest bandwidth requirement so it needs the highest QoS setting.
- EtherNet/IP drive traffic has high sensitivity to random drops, latency, and jitter.
- Real-time motion control and VoIP traffic can share the same VLAN with the proper QoS setting.
- IEEE1588 and PTP are important for ensuring real-time synchronization.
Correct answer: ADF
Question 7
Exhibit:
Which two statements are correct for a safe wiring installation to the terminal block of the switch or endpoint? (Choose two.)
- Insert a green ground wire into the terminal block that is marked RT for return.
- Verify that DC power is live and within 24 VDC voltage range before starting wiring.
- Verify that the DC power circuit includes an overcurrent protective device that limits the DC current to 5 A.
- Because this is a low-voltage DC circuit, anyone can install this wiring without electrical training or qualifications.
- Connect the positive 24 VDC conductor to the V terminal and connect the negative 24 VDC return wire to the RT terminal.
- A ground wire can optionally be connected to the screw terminal on the front of the switch.
Correct answer: CE
Question 8
What are two benefits of a star network topology? (Choose two.)
- Disruption of the entire network is not required when adding new machines.
- Any problem which leaves the network inoperable can be traced to the central hub.
- This network type requires less cable as compared to linear bus topology.
- The performance of one of the numerous nodes cannot reflect on the performance of other nodes.
- The performance of the entire network is directly dependent on the performance of the hub.
Correct answer: AB
Question 9
Which three of the following components must be elected before the Spanning Tree Protocol can converge in a switched LAN? (Choose three.)
- designated ports
- duplex operating mode
- fast mode ports
- root bridge
- root ports
- BDPU priority
Correct answer: ADE
Question 10
What is the purpose of Spanning Tree Protocol?
- to prevent routing loops
- to create a default route
- to provide multiple gateways for hosts
- to maintain a loop-free Layer 2 network topology
- to enhance the functions of SNMP
Correct answer: D
