Question 3
Drag and drop the credentials from the left onto the remote login information on the right to resolve a failed login attempt to vtys. Not all credentials are used.
aaa new-model
aaa authentication login default none aaa authentication login telnet local
!
username cisco password 0 Ocsic
!
line vty 0
password LetMeIn
login authentication telnet
transport input telnet
line vty 1
password LetMeIn
transport input telnet
Correct answer: To work with this question, an Exam Simulator is required.
Explanation:
vty 0:+ cisco + 0csic vty 1:+ no username + no password The command “aaa authentication login default none” means no authentication is required when access to the device via Console/VTY/AUX so if one interface does not specify another login authentication method (via the “login authentication ...” command), it will allow to access without requiring username or password. In this case VTY 1 does not specify another authentication login method so it will use the default method (which is “none” in this case).
vty 0:
+ cisco + 0csic
vty 1:
+ no username + no password
The command “aaa authentication login default none” means no authentication is required when access to the device via Console/VTY/AUX so if one interface does not specify another login authentication method (via the “login authentication ...” command), it will allow to access without requiring username or password. In this case VTY 1 does not specify another authentication login method so it will use the default method (which is “none” in this case).