File Info
| Exam | Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD) |
| Number | 300-425 |
| File Name | Cisco.300-425.VCEplus.2024-08-04.95q.vcex |
| Size | 2 MB |
| Posted | Aug 04, 2024 |
| Download | Cisco.300-425.VCEplus.2024-08-04.95q.vcex |
How to open VCEX & EXAM Files?
Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.
Coupon: MASTEREXAM
With discount: 20%
Demo Questions
Question 1
Where must the APs be mounted when used in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell?
- in the aisle
- under the seat
- above the stage
- under the stage
Correct answer: B
Explanation:
Question 2
A company wants to replace its existing PBX system with a new VoIP System that will include wireless IP phones. The CIO has concerns about whether the company's existing wireless network can support the new system.
Which tool in Cisco Prime can help ensure that the current network will support the new phone system?
- Location Readiness
- Site Calibration
- Map Editor
- Voice Readiness
Correct answer: D
Explanation:
Question 3
WLC SSO is set up between two WLCs in a service provider network serving public spaces. On WLC failover, it is noticed that only about half of the original client count is now showing on the secondary WLC, although it is currently showing the role as active. Which design side case explains the issue?
- The secondary WLC platform does not support the required client count.
- The WLCs had not completed database sync before the primary failure.
- SSO is not configured correctly.
- Some client sessions were in WebAuth-Req state before failover.
Correct answer: D
Question 4
Refer to the exhibit.
An engineer is about to establish a mobility peer connection between a Cisco Catalyst 9800-CL version 16.10.1e and Cisco AireOS 5520 version 8.8.120.0. The data path between the 9800-CL and AireOS 5520 is down, but its control path is up. Based on the configuration, what is the cause of the issue?
- The certificate hash key is incorrect leading to data path down.
- The data-link-encryption configuration is missing from the 9800-CL configuration.
- Encrypted mobility is being used in the 5520 configuration leading to data path down.
- CAPS is used to key in MAC address in the IOS_XE configuration leading to data path down.
Correct answer: B
Question 5
A customer is deploying an 802.11ac network on a oor to support approximately 300 wireless devices. Which setting must be changed on Cisco Prime Infrastructure Planning Tool to predict the number of APs the customer needs to service the new oor?
- Demand Settings
- Data Coverage Support Margin
- 802.11n Protocol Support
- Add AP Field
Correct answer: A
Question 6
An engineer added an AP to a deployment after a post-installation site survey. The engineer then notices an increase in co-channel interference and retransmissions. Which two features help mitigate the issue? (Choose two.)
- Cisco Compatible Extensions
- Transmit Power Control
- Enhanced Distributed Channel Access
- Coverage Hole Detection
- Dynamic Channel Assignment
Correct answer: BE
Question 7
A rapidly expanding company has tasked their network engineer with wirelessly connecting a new cubicle area with Cisco workgroup bridges until the wired network is complete. Each of 42 new users has a computer and VoIP phone. How many APs for workgroup bridging must be ordered to keep cost at a minimum while connecting all devices?
- 4
- 5
- 6
- 7
Correct answer: A
Explanation:
So, each AP will have 25 clients. Minimum 4 APs are sufficient. So, each AP will have 25 clients. Minimum 4 APs are sufficient.
Question 8
Which two considerations must a network engineer have when planning for voice over wireless roaming? (Choose two.)
- Full reauthentication introduces gaps in a voice conversation.
- Roaming time increases when using 802.1x + Cisco Centralized Key Management.
- Roaming occurs when the phone has seen at least four APs.
- Roaming occurs when the phone has reached -80 dBs or below.
- Roaming with only 802.1x authentication requires full reauthentication.
Correct answer: AE
Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/vowlan/41dg/vowlan41dg-book/vowlan_ch5.html https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/vowlan/41dg/vowlan41dg-book/vowlan_ch5.html
Question 9
An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?
- the client that has the highest RF properties
- the client that is used most by the company
- the client that is used least by the company
- the client with the worst RF characteristics
Correct answer: D
Explanation:
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_Access_Points https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_Access_Points
Question 10
Refer to the exhibit.
A client roams between two APs that are registered to two different controllers, where each controller has an interface in the client subnet. Both controllers are running AireOS. Which scenario explains the client roaming behavior?
- Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is moved from the original controller to the new controller.
- Controllers do not exchange mobility control messages (over UDP port 16666) andthe client database, entry is not moved from the original controller to the newcontroller.
- Controllers exchange mobility control messages (over UDP port 16666) and a new client session is started with the new controller.
- Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is tunneled from the original controller to the new controller.
Correct answer: A
Explanation:
