Free Download 300-515 Examp Dump: Cisco.300-515.VCEplus.2021-12-30.57q.vcex

Question 1

Which utility can you use to validate an LSP in an MPLS environment?

uRPF
MPLS LSP ping
logging
RSVP

Correct answer: B

Question 2

What is the primary function of aVRF on a router?

It enables the router to support multiple separate routing tables, which allows the device to handle overlapping IP addresses.
It enables a router to run BGP and a distance vector routing protocol at the same time, which allows it to serve as a VPN endpoint between remote sites.
It enables a router to configure VLANs locally, which provides segregation between networks.
It enables the router to provide faster switching through the network by using labels to identify the input and output interfaces for neighbor routers.

Correct answer: A

Question 3

Which two statements describe primary differences between MPLS Layer 2 and Layer 3 VPNs?(Choose two.)

Layer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use L2TPv3 tunneling.
Layer 2 VPNs use AToM, but Layer 3 VPNs use MPLS/BGP.
Layer 2 VPNs use BGP, but Layer 3 VPNs use VPLS.
Layer 2 VPNs use L2TPv3 tunneling, but Layer 3 VPNs use GRE tunneling.
Layer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use pseudowires to provide tunneling.

Correct answer: BD

Question 4

Refer to the exhibit. A network engineer has been called to configure the four PE devices in order to enable full communication among the four CE devices connected to them. While starting to configure, he experienced a connectivity issue.

Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.)

Configure PE3 to export route-targets 100:1 and 200:2.
Configure PE3 to import route-targets 100:1 and 200:2.
Configure PE4 to import route-targets 101:1 and 202:2.
Configure PE2 to export route-targets 300:3 and 400:4.
Configure PE1 to import route-targets 300:3 and 400:4.

Correct answer: AB

Explanation:

Question 5

Refer to the exhibit. If the two devices are operating normally, which two conclusions can you draw from this configuration? (Choose two.)

CE1 must use OSPF to establish a neighbor relationship with PE1.
PE1 labels the routes it learns from CE1 with the route-target 222:2 and shares them with its VPNv4 peers.
PE1 labels the routes it learns from CE1 with the route-target 111:1 and shares them with its VPNv4 peers.
The PE-CE routes between the devices are being exchanged by OSPF
CE1 is supporting CSC.

Correct answer: AD

Question 6

Which two frames can be configured on an Ethernet flow point?(Choose two.)

of a specific VLAN
with different type of service values
with identical type of service value
with different class of service values
with no tags

Correct answer: AE

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/configuration/xe-3s/asr903/16-5-1/b-ce-xe-16-5-asr900/trunk-efp-support.html

Question 7

In an Ethernet Virtual Circuit environment, which restriction do bridge domains have whenSTP is running?

The STP mode must be RSTP or PVST+
Bridge domains must be mapped to a different VLAN.
The STP mode must be MSTP
Bridge domains must belong to different MST instances.

Correct answer: C

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/ce/b_ce_xe-313s-asr920-book/b_ce_xe-313s-asr920-book_chapter_01.html#reference_770349446ED24E83821EF701DDC46BFD

Question 8

Refer to the exhibit. An engineer is implementing an MPLS P2MP TE solution. Which type of router can serve as the midpoint router and the tailend router in this P2MP TE network implementation?

headend
source
transit
bud

Correct answer: D

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/mpls/mp-te-path-setup-xe-3s-asr920-book/mp-te-path-setup-xe-3s-asr920-book_chapter_01.html

Question 9

An engineer is investigating an EVPN traffic flow issue. Which type of traffic should the engineer allow in an EVPN Tree Service in order to fix this issue?

known unicast from a leaf to another leaf
unknown unicast from a leaf to another leaf
multicast from a leaf to another leaf
known unicast from a root to another root

Correct answer: D

Explanation:

Reference: https://tools.ietf.org/html/draft-ietf-bess-evpn-etree-14

Question 10

An engineer is investigating an MPLS LDP issue. Which command should an engineer use on a Cisco IOS XE device to display the contents of the LFIB?

show mpls forwarding-table
show mpls ldp neighbors
show mpls ldp labels
show mpls ldp bindings

Correct answer: A

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mpls/command/mp-cr-book/mp-s2.html

Exam	Implementing Cisco Service Provider VPN Services
Number	300-515
File Name	Cisco.300-515.VCEplus.2021-12-30.57q.vcex
Size	2 MB
Posted	Dec 30, 2021
Download	Cisco.300-515.VCEplus.2021-12-30.57q.vcex

Download Cisco.300-515.VCEplus.2021-12-30.57q.vcex

File Info

How to open VCEX & EXAM Files?

Demo Questions