Free Download 300-610 Examp Dump: Cisco.300-610.Train4Sure.2020-04-07.36q.vcex

Question 1

Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?

Embedded RP
Phantom RP
MSDP
PIM anycast RP

Correct answer: D

Explanation:

Reference: https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-multicast/whitepaper_c11-508498.html

Question 2

An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?

IP redirects
flow control
proxy ARP
HSRP

Correct answer: C

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/b_NX-OS_LISP_Configuration_Guide/b_NX-OS_LISP_Configuration_Guide_chapter_010.html

Question 3

What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)

supports Layer 3 port channels
disables spanning-tree
no spanning-tree blocked ports
uses all available uplink bandwidth
maintains single control plane

Correct answer: CD

Explanation:

Reference: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf

Question 4

What is a design consideration when implementing FSPF?

Routes are based on the domain ID.
Routes are based on the distance vector protocol.
FSPF runs only on F Ports.
FSPF runs on a per-chassis basis.

Correct answer: A

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/fabric/nxos/cli_fabric/fspf.html

Question 5

The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?

All the VDC have the same out-of-band IP address.
Each VDC has a dedicated out-of-band Ethernet management port.
Each VDC has a unique out-of-band IP address from the same IP subnet.
Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.

Correct answer: C

Question 6

Which two configurations allow for routing traffic between two VDCs? (Choose two.)

Connect the VDCs to an external Layer 3 device.
Cross-connect the ports between the VDCs.
Create VRF-aware software infrastructure interfaces.
Create a policy map in the default VDC that routes traffic between the VDCs.
Create interfaces in the VDC that can be accessed by another VDC.

Correct answer: AD

Question 7

Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?

BFD
UDLD
MCP
LLDP

Correct answer: B

Question 8

What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)

Layer 3 interfaces can belong to multiple VRFs.
VRF-Lite interfaces can be Layer 2.
Overlapping IP addresses are permitted on different VRFs.
Interfaces that belong to VRFs can be physical or logical.
VRF-Lite interfaces support MPLS.

Correct answer: CD

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/cgr1000/ios/software/15_4_1_cg/vrf_cgr1000.html

Question 9

Refer to the exhibit.

What must be the default gateway of the servers in EPG Web?

subnet address of BD1
subnet address of L3Out
subnet address of BD2
NAT appliance

Correct answer: D

Question 10

Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.

VPC+
UDLD
EVPN
OSPF

Correct answer: C

Exam	Designing Cisco Data Center Infrastructure (DCID)
Number	300-610
File Name	Cisco.300-610.Train4Sure.2020-04-07.36q.vcex
Size	524 KB
Posted	Apr 07, 2020
Download	Cisco.300-610.Train4Sure.2020-04-07.36q.vcex

Download Cisco.300-610.Train4Sure.2020-04-07.36q.vcex

File Info

How to open VCEX & EXAM Files?

Demo Questions