Free Download 300-620 Examp Dump: Cisco.300-620.BrainDumps.2020-04-15.36q.vcex

Question 1

An engineer is implementing a Cisco ACI data center network that includes Cisco Nexus 2000 Series 10G fabric extenders. Which physical topology is supported?

Correct answer: D

Question 2

An ACI administrator notices a change in the behavior of the fabric. Which action must be taken to determine if a human intervention introduced the change?

Inspect event records in the APIC UI to see all actions performed by users.
Inspect /var/log/audit_messages on the APIC to see a record of all user actions.
Inspect audit logs in the APIC UI to see all user events.
Inspect the output of show command history in the APIC CLI.

Correct answer: A

Question 3

An engineer is creating a configuration import policy that must terminate if the imported configuration is incompatible with the existing system. Which import mode achieves this result?

merge
atomic
best effort
replace

Correct answer: B

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/aci-fundamentals/Cisco-ACI-Fundamentals-401/Cisco-ACI-Fundamentals-401_chapter_01011.html

Question 4

Which components must be configured for the BGP Route Reflector policy to take effect?

spine fabric interface overrides and profiles
access policies and profiles
pod policy groups and profiles
leaf fabric interface overrides and profiles

Correct answer: A

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/L3-configuration/Cisco-APIC-Layer-3-Networking-Configuration-Guide-401/Cisco-APIC-Layer-3-Networking-Configuration-Guide-401_chapter_01.html

Question 5

Which type of profile needs to be created to deploy an access port policy group?

attachable entity
Pod
module
leaf interface

Correct answer: A

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_0110.html

Question 6

A situation causes a fault to be raised on the APIC. The ACI administrator does not want that fault to be raised because it is not directly relevant to the environment. Which action should the administrator take to prevent the fault from appearing?

Under System -> Faults, right-click on the fault and select Acknowledge Fault so that acknowledged faults will immediately disappear.
Create a stats threshold policy with both rising and falling thresholds defined so that the critical severity threshold matches the squelched threshold.
Under System -> Faults, right-click on the fault and select Ignore Fault to create a fault severity assignment policy that hides the fault.
Create a new global health score policy that ignores specific faults as identified by their unique fault code.

Correct answer: C

Question 7

A RADIUS user resolves its role via the Cisco AV Pair. What object does the Cisco AV Pair resolve to?

tenant
security domain
primary Cisco APIC
managed object class

Correct answer: D

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/Security_config/b_Cisco_APIC_Security_Configuration_Guide/b_Cisco_APIC_Security_Guide_chapter_01011.html

Question 8

Which description regarding the initial APIC cluster discovery process is true?

The APIC uses an internal IP address from a pool to communicate with the nodes.
Every switch is assigned a unique AV by the APIC.
The APIC discovers the IP address of the other APIC controllers by using Cisco Discovery Protocol.
The ACI fabric is discovered starting with the spine switches.

Correct answer: C

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamentals/b_ACI-Fundamentals_chapter_010011.html

Question 9

Refer to the exhibit. Which two components should be configured as route reflectors in the ACI fabric? (Choose two.)

Spine1
apic1
Spine2
Leaf1
Leaf2
apic2

Correct answer: AC

Question 10

When creating a subnet within a bridge domain, which configuration option is used to specify the network visibility of the subnet?

limit IP learning to subnet
scope
gateway IP
subnet control

Correct answer: C

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_0111.html

Exam	Implementing Cisco Application Centric Infrastructure (DCACI)
Number	300-620
File Name	Cisco.300-620.BrainDumps.2020-04-15.36q.vcex
Size	1 MB
Posted	Apr 15, 2020
Download	Cisco.300-620.BrainDumps.2020-04-15.36q.vcex

Download Cisco.300-620.BrainDumps.2020-04-15.36q.vcex

File Info

How to open VCEX & EXAM Files?

Demo Questions