Free Download 300-710 Examp Dump: Cisco.300-710.Braindump2go.2024-02-16.221q.vcex

Question 1

An organization has implemented Cisco Firepower without IPS capabilities and now wants to enable inspection for their traffic.

They need to be able to detect protocol anomalies and utilize the Snort rule sets to detect malicious behavior. How is this accomplished?

Modify the network discovery policy to detect new hosts to inspect.
Modify the access control policy to redirect interesting traffic to the engine.
Modify the intrusion policy to determine the minimum severity of an event to inspect.
Modify the network analysis policy to process the packets for inspection.

Correct answer: D

Explanation:

https://www.cisco.com/c/en/us/td/docs/security/firepower/670/fdm/fptd-fdm-config-guide-670/fptd-fdmintrusion.html

Question 2

A hospital network needs to upgrade their Cisco FMC managed devices and needs to ensure that a disaster recovery process is in place. What must be done in order to minimize downtime on the network?

Configure a second circuit to an ISP for added redundancy
Keep a copy of the current configuration to use as backup
Configure the Cisco FMCs for failover
Configure the Cisco FMC managed devices for clustering.

Correct answer: C

Question 3

With Cisco FTD software, which interface mode must be configured to passively receive traffic that passes through the appliance?

ERSPAN
IPS-only
firewall
tap

Correct answer: A

Explanation:

https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-configguide-v64/interface_overview_for_firepower_threat_defense.html

Question 4

A Cisco FTD device is running in transparent firewall mode with a VTEP bridge group member ingress interface.

What must be considered by an engineer tasked with specifying a destination MAC address for a packet trace?

The destination MAC address is optional if a VLAN ID value is entered
Only the UDP packet type is supported
The output format option for the packet logs unavailable
The VLAN ID and destination MAC address are optional

Correct answer: A

Explanation:

https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/troubleshooting_the_system.html

Question 5

What is a characteristic of bridge groups on a Cisco FTD?

In routed firewall mode, routing between bridge groups must pass through a routed interface.
In routed firewall mode, routing between bridge groups is supported.
In transparent firewall mode, routing between bridge groups is supported
Routing between bridge groups is achieved only with a router-on-a-stick configuration on a connected router

Correct answer: B

Explanation:

https://www.cisco.com/c/en/us/td/docs/security/asa/asa97/configuration/general/asa-97-general-config/intro-fw.pdf

Question 6

Network traffic coining from an organization's CEO must never be denied.

Which access control policy configuration option should be used if the deployment engineer is not permitted to create a rule to allow all traffic?

Configure firewall bypass.
Change the intrusion policy from security to balance.
Configure a trust policy for the CEO.
Create a NAT policy just for the CEO.

Correct answer: C

Question 7

In a multi-tenant deployment where multiple domains are in use. Which update should be applied outside of the Global Domain?

minor upgrade
local import of intrusion rules
Cisco Geolocation Database
local import of major upgrade

Correct answer: C

Question 8

A mid-sized company is experiencing higher network bandwidth utilization due to a recent acquisition. The network operations team is asked to scale up their one Cisco FTD appliance deployment to higher capacities due to the increased network bandwidth.

Which design option should be used to accomplish this goal?

Deploy multiple Cisco FTD appliances in firewall clustering mode to increase performance.
Deploy multiple Cisco FTD appliances using VPN load-balancing to scale performance.
Deploy multiple Cisco FTD HA pairs to increase performance
Deploy multiple Cisco FTD HA pairs in clustering mode to increase performance

Correct answer: A

Explanation:

https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/clustering/ftd-cluster-solution.html#concept_C8502505F840451C9E600F1EED9BC18E

Question 9

An organization has seen a lot of traffic congestion on their links going out to the internet There is a Cisco Firepower device that processes all of the traffic going to the internet prior to leaving the enterprise. How is the congestion alleviated so that legitimate business traffic reaches the destination?

Create a flexconfig policy to use WCCP for application aware bandwidth limiting
Create a VPN policy so that direct tunnels are established to the business applications
Create a NAT policy so that the Cisco Firepower device does not have to translate as many addresses
Create a QoS policy rate-limiting high bandwidth applications

Correct answer: D

Question 10

An engineer configures an access control rule that deploys file policy configurations to security zone or tunnel zones, and it causes the device to restart. What is the reason for the restart?

Source or destination security zones in the access control rule matches the security zones that are associated with interfaces on the target devices.
The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the destination policy.
Source or destination security zones in the source tunnel zone do not match the security zones that are associated with interfaces on the target devices.
The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the source policy.

Correct answer: A

Explanation:

https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guide-v623/policy_management.html

Exam	Certifications: CCNP Security, Cisco Certified Specialist - Network Security Firepower
Number	300-710
File Name	Cisco.300-710.Braindump2go.2024-02-16.221q.vcex
Size	2 MB
Posted	Feb 16, 2024
Download	Cisco.300-710.Braindump2go.2024-02-16.221q.vcex

Download Cisco.300-710.Braindump2go.2024-02-16.221q.vcex

File Info

How to open VCEX & EXAM Files?

Demo Questions