Download Cisco.350-801.DumpsBase.2022-03-15.277q.vcex

Download Exam

File Info

Exam Implementing Cisco Collaboration Core Technologies (CLCOR)
Number 350-801
File Name Cisco.350-801.DumpsBase.2022-03-15.277q.vcex
Size 10 MB
Posted Mar 15, 2022
Download Cisco.350-801.DumpsBase.2022-03-15.277q.vcex

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.


With discount: 20%

Demo Questions

Question 1

An administrator installed a Cisco Unified IP 8831 Conference Phone that is failing to register.Which two actions are taken to troubleshoot the problem? (Choose two)

  1. Disable HSRP on lhe access layer switch.
  2. Verify that the switch port of the phone is enabled
  3. Check the RJ-65 cable.
  4. Verify that the RJ-11 cable is plugged into the PC port.
  5. Verify that the phone's network can access the option 150 server.
Correct answer: BE

Question 2

AN engineer is implementing toll fraud prevention for incoming calls cluster-wide on cisco UCM.What is the first step to configure this feature?

  1. Set service parameter 'Block OffNet to OffNet Transfer' to False
  2. Configure blocking for inbound calls based on caller ID.
  3. Set service parameter "System Remote Access Blocked Numbers' to True
  4. Set service parameter 'Block OffNet To OffNet Transfer' to True
Correct answer: A

Question 3

An administrator executes the debug isdn q931 command while debugging a failed call. After a test call isplaced, the logs return a disconnect cause code of 1.  
What is the cause of this problem?

  1. The destination number rejects the call
  2. The destination number is busy
  3. The media resource is unavailable
  4. The dialed number is not assigned to an endpoint
Correct answer: D

Question 4

Which version is used to provide encryption for SNMP management traffic in collaboration deployments?

  1. SNMPv1
  2. SNMPv3
  3. SNMPv2
  4. SNMPv2c
Correct answer: B

Question 5

When a 8800 series phone is registered over MRA, where does it register?

  1. Cisco Unified Communications Manager
  2. Expressway-C
  3. Cisco Unified Presence Server
  4. Expressway-E
Correct answer: A

Question 6

After an engineer implements the FAC and CMC features together, users report that calls take almostone minute to complete and that they occasionally hear the reorder tone.  
Which two actions address this issue? (Choose two.)

  1. Advise the user to press the "#" button after dialling the FAC and CMC codes 
  2. Change the code if the problem persists i/i-Advise the user to hang up and try again
  3. Adjust the T302 timer from the default of 15 seconds to 5 seconds to shorten the interdigit timer
  4. Do not wait for the tones immediately dial the FAC and CMC
Correct answer: AC

Question 7

Which Cisco Unity Connection handler plays a greeting that announces the option to dial a userextension by default?

  1. the Goodbye call handler
  2. the Operator call handler
  3. the Directory handler
  4. the Interview handler
Correct answer: C

Question 8

An engineer must configure an MGCP gateway and register it to Cisco Unified CommunicationsManager.  
Which prerequisite must be met before applying the gateway commands to enable MGCP?

  1. The MGCP gateway and the Cisco Unified CM must be able to communicate over 2427,2428, and
  2. The MGCP gateway must have voice service VoIP configured.
  3. Cisco Unified CM and the MGCP gateway must utilize the SIP OPTIONS ping feature to monitor status.
  4. The MGCP gateway and the Cisco Unified CM must be able to communicate over ports 5060 and 5061.
Correct answer: A

Question 9

Which Cisco Unified communications manager configuration is required for SIP MWI integration?

  1. Select “Redirecting Diversion Header Delivery – Inbound” on the SIP trunk.
  2. Enable “Accept presence subscription” on the SIP trunk security profile.
  3. Select “Redirecting Diversion Header Delivery – outbound” on the SIP trunk.
  4. Enable “Accept unsolicited notification” on the SIP Trunk security profile.
Correct answer: D

Question 10

What happens to voice packets from a Cisco 8845 IP Phone in the QoS trust boundary?

  1. The phone and access layer switch negotiate the classification of packets
  2. The voice packets are classified by the phone, and the classification is accepted.
  3. Cisco UCM determines how the voice packets are classified
  4. The voice packets are not trusted, and the access layer switch reclassifies the packets.
Correct answer: B





You can buy ProfExam with a 20% discount!


Use ProfExam Simulator to open VCEX files