Download Dell.DNDNS-200.PassGuide.2018-09-23.55q.vcex

Download Exam

File Info

Exam Dell Networking Professional Exam
Number DNDNS-200
File Name Dell.DNDNS-200.PassGuide.2018-09-23.55q.vcex
Size 13 MB
Posted Sep 23, 2018
Download Dell.DNDNS-200.PassGuide.2018-09-23.55q.vcex

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase

Coupon: MASTEREXAM
With discount: 20%





Demo Questions

Question 1

Which component is required to deploy the N2000/N3000 Series switches in a stack configuration?


  1. Ethernet cables
  2. SAS cables
  3. Optical Transceivers
  4. TwinX cables
Correct answer: B
Explanation:
References:Dell Networking N-Series N1500, N2000, N3000, and N4000 Switches User’s Configuration Guide. Page 193.
References:
Dell Networking N-Series N1500, N2000, N3000, and N4000 Switches User’s Configuration Guide. Page 193.



Question 2

Refer to the output. 
  
According to the partial configuration, which two things have occurred? (Choose two.)


  1. All the configured neighbors are in autonomous system 200.
  2. Three AS-path filters are applied to each BGP neighbor.
  3. The peer group shortens the IBGP configuration.
  4. Only the outgoing filters are applied to BGP updates.
  5. The peer group shortens the EBGP configuration.
Correct answer: AC



Question 3

  
Refer to the exhibit. 
A customer has a C-Series chassis using a 48-port PoE+ line card. A workstation connected to Gi 0/47 passes traffic as expected. When the customer connects a PoE phone to the interface, the phone does NOT power up. 
Which configuration should a network engineer set on the Gi 0/47 interface to provide power to the phone?


  1. console(conf-if-gi-0/47)#auto power inline
  2. console(conf-if-gi-0/47)#power inline on
  3. console(conf-if-gi-0/47)#power inline auto
  4. console(conf-if-gi-0/47)#power priority inline auto
Correct answer: C



Question 4

The network engineer has two Dell Networking switches: an N-Series and an S-Series. Both switches have the factory default configuration. 
Which phrase correctly describes the current state of spanning-tree on both switches?


  1. S-Series Globally Disabled 
    N-Series Globally Disabled
  2. S-Series Globally Enabled 
    N-Series Globally Disabled
  3. S-Series Globally Enabled 
    N-Series Globally Enabled
  4. S-Series Globally Disabled 
    N-Series Globally Enabled
Correct answer: D



Question 5

A network engineer has configured LACP on two connected S-Series switches. LACP is not formed for port TenGigabitEthernet 0/72. 
The network engineer has issued “show lacp” to debug the issue. 
  
From the output shown, what are two likely reasons for this result? (Choose two.)


  1. Peer port-channel is configured in passive mode.
  2. Link speed of the port is different.
  3. MTU of the port is different from the channel members.
  4. Peer port-channel protocol is configured differently.
  5. Peer port-channel priority configured is zero.
  6. Peer port-channel key is configured differently.
Correct answer: DF



Question 6

 
 
Refer to the exhibit. 
A customer has a SAN deployment consisting of a single Dell server and Equallogic storage array on a segregated VLAN communicating over a C9010. The storage arrays are reporting excessive ISCSI retransmits. 
Which configuration change should a network engineer apply to resolve this issue?


  1. Flowcontrol needs to be configured for ‘flowcontrol rx on tx off’ on the host and array-facing interfaces.
  2. Flowcontrol needs to be configured for ‘flowcontrol rx on tx on’ on the host and array-facing interfaces.
  3. MTU size needs to be configured for 12000 on the ISCSI VLAN.
  4. MTU size needs to be configured for 9252 on the host and array-facing interfaces.
Correct answer: B



Question 7

A network engineer is verifying the configuration of a LAG connection on an S-Series switch. 
Which two commands should the network engineer use to determine the operation of the LAG? (Choose two.) 


  1. show lacp <interface>
  2. show interface <port-channel number>
  3. show port-channel-flow <interface>
  4. show uplink-state-group <port-channel number>
Correct answer: AB



Question 8

  
  
Refer to the exhibits. 
A networking engineer is unable to ping from VLAN 30 across two S-Series switches. Port 13 on switch Dell1 and Port 43 on switch Dell2 both have a link status of up. 
Why does the ping fail between the two switches?


  1. Dell1 switch VLAN 30 interface is down.
  2. Dell2 switch VLAN 30 interface is down.
  3. Dell2 switch port 44 is misconfigured as Untagged.
  4. Dell2 switch port 43 is misconfigured as Tagged.
Correct answer: D



Question 9

 
 
Refer to the exhibit. 
On switch S4820-1, commands are entered. The associated output is as shown. 
  
What correctly defines the state of the Root Bridge for VLAN 2 and VLAN 3?


  1. VLAN 2 Root Bridge – S4820-2 
    VLAN 3 Root Bridge – S4820-2
  2. VLAN 2 Root Bridge – S4820-2 
    VLAN 3 Root Bridge – S4820-1
  3. VLAN 2 Root Bridge – S4820-1 
    VLAN 3 Root Bridge – S4820-1
  4. VLAN 2 Root Bridge – S4820-1 
    VLAN 3 Root Bridge – S4820-2
Correct answer: B



Question 10

Two Dell S-Series Switches are directly connected. 
  
Which statement describes what will happen when a ping is sent from Dell-1 to Dell-2?


  1. Ping will not work because of MTU Mismatch.
  2. Ping will not work because of IP Network Mismatch.
  3. LLDP shows 0/37 is connected to 0/39 and pings will be successful.
  4. Link is Operationally up; therefore, pings will work.
Correct answer: B









CONNECT US

Facebook

Twitter

PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount!

Get Now!


HOW TO OPEN VCEX FILES

Use ProfExam Simulator to open VCEX files