File Info
| Exam | Service Provider Routing and Switching, Specialist (JNCIS-SP) |
| Number | JN0-361 |
| File Name | Juniper.JN0-361.Test4Prep.2019-12-23.39q.vcex |
| Size | 3 MB |
| Posted | Dec 23, 2019 |
| Download | Juniper.JN0-361.Test4Prep.2019-12-23.39q.vcex |
How to open VCEX & EXAM Files?
Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.
Coupon: MASTEREXAM
With discount: 20%
Demo Questions
Question 1
What is the default TTL value for EBGP?
- 64
- 48
- 255
- 1
Correct answer: D
Question 2
Because of recent network failures, additional circuits have been purchased. In addition, fast reroute has been configured on critical MPLS LSPs.
When the next failure occurs, which two time intervals will affect fast reroute? (Choose two.)
- The amount of time required to reroute the traffic onto the detour
- The amount of time to detect a link or node failure
- The amount of time required to recalculate the best detour
- The amount of time it takes to ping the gateway on the detour link
Correct answer: AB
Question 3
What must be configured for all IBGP speakers in an AS to have consistent routing information?
- Partial mesh of EBGP sessions between EBGP speakers
- Default routes to the IBGP gateways
- Static routes to the EBGP gateways
- Full mesh of IBGP sessions between IBGP speakers
Correct answer: D
Question 4
You have configured the IBGP group shown in the exhibit. However, committing your configuration fails.
Which parameter should you add to the IBGP group configuration to correct the problem?
- Type external
- Type internal
- Export <policy name>
- As -override
Correct answer: B
Question 5
You have configured OSPF between two routers. The OSPF adjacency will not form.
Referring to the exhibit, what is the problem?
- The router is not receiving hellos on the configured interface.
- The OSPF version does not match on the configured interfaces.
- The router is not sending hellos on the configured interface.
- The area does not match on the configured interfaces.
Correct answer: D
Question 6
Referring to the configuration in the exhibit, which statement is true?
- The next-hop 172.16.1.2 must be directly connected to the router for route 192.168.5.0/24 to be active.
- The next-hop 172.16.1.2 must be part of an active route in route table inet.0 for route 192.168.5.0/24 to be active.
- The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.
- The next-hop 172.16.1.2 must be active in route table inet.3 for the route 192.168.5.0/24 to be active.
Correct answer: B
Question 7
You want to save adjacency formation time between two routers participating in OSPF, as well as reduce the size of the OSPF link-state database.
How would you accomplish these tasks?
- Configure a virtual link.
- Specify a designated router.
- Specify a backup designated router.
- Define a point-to-point connection.
Correct answer: D
Question 8
You are using OSPF as your IGP in your network. You have applied the OSPF configuration shown in the exhibit to router R1.
Which statement is true in this scenario?
- Router R1 must be configured as a stub area for Area 0.0.0.0.
- Router R1 will send a default route to router R2.
- Router R2 will not have a route to subnet 172.16.4.0/24.
- Router R3 will not have a route to subnet 172.16.3.0/24.
Correct answer: D
Question 9
Which two fields of a hello packet must match on both routers when forming an OSPF adjacency? (Choose two.)
- Hello interval
- Designated route
- Router priority
- Network mask
Correct answer: AD
Question 10
You are establishing RSVP LSPs through your MPLS-enabled network. You are asked to ensure that the LSPs will support end-to-end class-of-service handling.
Which statement is correct in this scenario?
- Configure ultimate-hop-popping on the egress device.
- Configure implicit-null on all MPLS-enabled devices.
- Configure explicit-null on all MPLS-enabled devices.
- Configure entropy-label on the egress device.
Correct answer: A
