Free Download NS0-184 Examp Dump: NetApp.NS0-184.VCEplus.2022-09-11.60q.vcex

Question 1

A customer wants to replace their ONTAP cluster CN1610 switches with Cisco Nexus 3132Q-V switches. They want to perform a non-disruptive upgrade.

Referring to the exhibit, which cable will be required to non-disruptively migrate to the new switches?

a 10GbE SFP+ to SFP+ cable
a 100GbE QSFP28+ to 4x25GbE SFP28+ cable
a 40GbE QSFP+ to QSFP+ cable
a 40GbE QSFP+ to 4x10GbE SFP+ cable

Correct answer: B

Explanation:

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/upgrade/guide/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.html

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-

x/upgrade/guide/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.html

Question 2

Which logical interface has a fixed firewall policy?

data LIF
cluster management LIF
cluster LIF
intercluster LIF

Correct answer: C

Explanation:

Reference: https://docs.netapp.com/usen/ontap/networking/configure_firewall_policies_for_lifs.html#create-a-firewall-policy-andassigning-it-to-a-lif

Question 3

During an ONTAP cluster handover procedure, your customer asks how to identify and solve issues that might occur on the newly deployed array.

Referring to the exhibit, which two widgets would the customer use to help with these issues?

(Choose two.)

Guide Me
Active IQ
Contracts and Warranties
ASE Corner

Correct answer: AC

Question 4

You have a 2-node FAS8300 ONTAP 9.8 cluster that serves SMB shares. You are configuring interface groups for higher performance and resiliency.

Which two NetApp best practices should you follow to satisfy these performance and resiliency requirements? (Choose two.)

Use ports from different NICs.
Use ports from the same NICs.
Use ports with different chipsets.
Use ports with the same chipsets.

Correct answer: AD

Explanation:

Reference: https://www.netapp.com/media/19900-tr-4847.pdf (7)

Question 5

You are preparing for the installation of a new 2-node switchless AFF A250 ONTAP 9.8 cluster and need to obtain the preinstallation information from the customer.

In this scenario, what are three examples of data required from the customer? (Choose three.)

management IP addresses
cluster switch name
gateway IP address
BMC IP addresses
cluster name

Correct answer: ABD

Explanation:

Reference: https://docs.netapp.com/us-en/ontap-systems/a250/install-detailed-guide.html#step-1-prepare-for-installation

Question 6

Which set of components on a FAS9000 are highlighted in the exhibit?

FCVI-Module, Controller, Serial-Port, FlashCache-Module
SAS-Module, Controller, USB-Port, FlashCache-Module
NVRAM-Module, Controller, Serial-Port, FlashCache-Module
Powersupply, Controller, USB-Port, NVRAM-Module

Correct answer: A

Question 7

After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view telemetry dat a. The customer also wants to receive online information about any risks with the cluster and potential best-practice

gaps.

Which tool satisfies the customer's requirements?

Active IQ Digital Advisor
Interoperability Matrix Tool
Spot by NetApp
Cloud Manager

Correct answer: A

Explanation:

Reference: http://docs.netapp.com/us-en/ontap/pdfs/sidebar/Cluster_administration.pdf

Question 8

After the installation of a new ONTAP 9.8 cluster, you have to verify if AutoSupport works.

In this scenario, which two commands would you use to accomplish this task? (Choose two.)

system node autosupport history show
system node autosupport check show
system node autosupport destination show
system node autosupport invoke

Correct answer: AB

Explanation:

Reference: http://docs.netapp.com/us-en/ontap/pdfs/sidebar/Troubleshoot_AutoSupport.pdf

Question 9

A customer requires encryption at rest on every node root volume.

In this scenario, which two encryption solutions will fulfill this requirement? (Choose two.)

NVE
IPsec
NAE
NSE

Correct answer: AC

Explanation:

Reference: https://docs.netapp.com/us-en/ontap/encryption-at-rest/configure-netapp-volumeencryption-concept.html#aggregate-level-encryption

Question 10

Your customer currently has a 4-node AFF A400 cluster that runs ONTAP 9.8, with two NS224 shelves that are connected to each HA pair. The customer needs to add additional capacity to the cluster.

Which two actions would enable the customer to accomplish this task? (Choose two.)

Connect the new NS224 shelves to the existing NS224 shelves and adjust the shelf IDs.
Connect the new NS224 shelves to the existing Cisco Nexus 3232C switches.
Deploy a new AFF A400 to the cluster.
Deploy new, dedicated, storage switches for the new NS224 shelves.

Correct answer: AC

Explanation:

Reference: https://docs.netapp.com/us-en/ontap-systems/ns224/hot-add-shelf.html#prepare-an-affa700-aff-a800-or-aff-a400-ha-pair-to-hot-add-a-second-shelf

Exam	NetApp Certified Storage Installation Engineer, ONTAP
Number	NS0-184
File Name	NetApp.NS0-184.VCEplus.2022-09-11.60q.vcex
Size	5 MB
Posted	Sep 11, 2022
Download	NetApp.NS0-184.VCEplus.2022-09-11.60q.vcex

Download NetApp.NS0-184.VCEplus.2022-09-11.60q.vcex

File Info

How to open VCEX & EXAM Files?

Demo Questions