Download NetApp.NS0-593.VCEplus.2025-01-03.48q.vcex

Download Exam

File Info

Exam NetApp certified support engineer - ONTAP specialist
Number NS0-593
File Name NetApp.NS0-593.VCEplus.2025-01-03.48q.vcex
Size 2 MB
Posted Jan 03, 2025
Download NetApp.NS0-593.VCEplus.2025-01-03.48q.vcex

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase

Coupon: MASTEREXAM
With discount: 20%





Demo Questions

Question 1

A system panic due to an "L2 watchdog timeout hard reset" error occurred. You have found a FIFO message in the SP log.
Which FIFO message Is useful for Investigating this Issue?


  1. before NMI BBSP:C=00 L=00 FIFO: F3 F2 F1 F0 5 B2 0 0 0 80 20 E F E3 C0 C2 3 4 6 7 9 9 A
  2. BIOS exit BBSP:C=2F L=20 FIFO: 2 C8 C9 C4 24 4 6 18 7 8 11
  3. before Reset BBSP:C=00 L=00 FIFO:
  4. ONTAP Shutdown BBSP:C=00 L=2F FIFO:
Correct answer: B



Question 2

An administrator receives the following error message:
 
What are two causes for this error? (Choose two.)


  1. There Is excessive SSD load causing the wear leveling to become unbalanced. 
  2. A disk is falling.
  3. There is excessive SATA HDD load.
  4. An SSD disk is performing garbage collection to create a dense data layout.
Correct answer: AC



Question 3

After expanding a two-node AFF A300 cluster with two AFF A700 nodes, you observe latencies when data is accessed indirectly. The system node run -node -command netstat command shows retransmits and packet drops on the LIFs.
The AFF A700 nodes with 40 Gbps and the AFF A300 connect with 10 Gbps to the cluster interconnect. You are using Cisco Nexus 3132Q cluster interconnect switches. You just updated to ONTAP 9.8 software.
In this scenario, what is causing this problem?


  1. The 10 Gbps to 10 Gbps cluster Interconnect is creating a speed mismatch.
  2. AFF A300 and AFF A700 node mixing Is not supported in ONTAP 9.8 software.
  3. The AFF A300 Is using an adapter card for the cluster Interconnect, but only onboard ports are supported.
  4. There is an NXOS firmware mismatch, verify in the Interoperability Matrix (1MTJ for a supported version.
Correct answer: A



Question 4

Which two throughput elements are controlled by host applications? (Choose two.)


  1. operation size
  2. Jitter
  3. concurrency
  4. latency
Correct answer: BD



Question 5

A 2-node cluster hosts only NAS data UFs. All nodes lose access to the cluster network.
 
Referring to the exhibit, which statement is correct?


  1. Both nodes race to takeover the other, one node will takeover the other node. 
  2. No takeover event will occur and NAS data UFs will not be accessible.
  3. All nodes in the cluster reset and NAS data UFs are not accessible after reboot.
  4. NAS data UFs are accessible on only the node that has Epsilon.
Correct answer: C



Question 6

Your customer noticed in NetApp Active IQ that their NetApp Cloud Volumes ONTAP for Azure HA solution is no longer sending AutoSupport messages over HTTPS. A support ticket has been opened to find out why. No changes have been made to the Cloud Volumes ONTAP for Azure HA environment.
In this scenario, which two autosupport command parameters should be used to validate that AutoSupport Is working properly? {Choose two.)


  1. -mail-hosts
  2. -transport
  3. -proxy-url
  4. -to
Correct answer: AC



Question 7

Which two statements about NetApp Cloud Volumes ONTAP licenses ate true? (Choose two.)


  1. Having an Essentials package enables you to convert to another licensing option.
  2. Capacity-based license packages support only single-node configurations.
  3. BYOL licenses are purchased directly from NetApp.
  4. AWS Marketplace contracts cannot be mixed with BYOL.
Correct answer: BC



Question 8

Your customer complains that u host will constantly report losing a connection to the iSCSl target and then report that the session was reestablished.
 
As shown in the exhibit, what is a cause of this flapping?


  1. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 have the same IQN.
  2. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are in different initiator groups. 
  3. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are accessing the same LUN.
  4. A host with an IP address of 172.20.10.80 and a second IP address of 10.10.20.60 is accessing different LUNs.
Correct answer: C



Question 9

A storage administrator reports that a monitoring toot is reporting that the storage controller reads between 90% to 93% CPU use. You run the sysstat -m command against the node in question.
 
Referring to the exhibit, which statement is correct?


  1. The customer should be advised to exclude certain workflows to reduce use.
  2. High network exempt use could be a problem.
  3. You should immediately investigate further by gathering perfstat data and opening a support case.
  4. The CPU Is not a first-order monitoring metric for ONTAP.
Correct answer: C



Question 10

You have a 4-node NetApp ONTAP 9.8 cluster with an AFF A400 HA pair and a FAS8300 HA pair with 16 TB NL-SAS drives. You are asked to automatically tier 150 TB of Snapshot copy data from the AFF A400 aggregates to the FAS8300.
In this scenario, which ONTAP license must be added to the cluster to accomplish this task?


  1. S3 license
  2. VE license
  3. TPM license
  4. FabricPool license
Correct answer: C









CONNECT US

Facebook

Twitter

PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount!

Get Now!


HOW TO OPEN VCEX FILES

Use ProfExam Simulator to open VCEX files