Free Download NS0-171 Examp Dump: Network Appliance.NS0-171.PracticeDumps.2017-12-18.57q.tqb

Question 1

What are two valid cluster interconnect switches? (Choose two.)

NetApp CN610
Cisco Nexus 5596
Cisco Nexus 9504
Cisco Nexus 7004

Correct answer: AB

Explanation:

Reference https://library.netapp.com/ecm/ecm_get_file/ecmp1115327

Question 2

A Cisco UCS system is operating in FC End-Host Mode. The fabric Interconnects are uplinked into Nexus 5672UP switches using native FC. The service profiles are unable to boot from SAN using FC. When executing the show flogi database command on the Nexus switches, only the Fabric Interconnect port WWNs are visible. No service profile WWNs are shown.

What caused this issue?

The Nexus switches do not have NPV enabled.
The Nexus must be configured for FCoE instead of native Fibre Channel.
The Nexus switches do not have NPIV enabled.
The zoning on the Nexus switches is incorrect.

Correct answer: C

Explanation:

Reference https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-manager/whitepaper_c11-697337.html

Question 3

Click the Exhibit button.

An administrator is building a FlexPod configuration with UCS 6296 Fabric Interconnect devices that support legacy Fibre Channel 9FC) connections. The administrator uses UCS Manager to configure the unified ports on the Fabric Interconnect.

Referring to the exhibit, how many ports will FC use after the configuration is completed?

16
2
1
6

Correct answer: A

Question 4

An administrator is configuring a Flexpod Datacenter solution. The UCS service profiles will use FCoE connectivity to the NetApp cluster.

Which pool is needed to configure the vHBA templates?

WWPN pool
MAC pool
IQN pool
WWNN pool

Correct answer: A

Question 5

Which LIF role is used for SnapMirror traffic on a system running clustered Data ONTAP?

intercluster
node-management
interconnect
cluster-management

Correct answer: A

Question 6

Which set of commands maps VLAN 100 to VSAN 100?

Nexus 5000-A#configure terminal
Nexus 5000-A (config) # vlan 100
Nexus 5000- A (config-vlan_ #fcoe vsan 100
Nexus 5000-B# configure terminal
Nexus 5000-B (config) # vsan database
Nexus 5000-B (config-vsan)# vsan 100
Nexus 5000-B(config- vsan) #vsan 100 name FCoE-VLAN 100
Nexus 5000-A#configure terminal
Nexus 5000-B (config) # vsan database
Nexus 5000-A (config)# vsan 100
Nexus 5000-A (config-vsan) # fcoe vsan 100
Nexus 5000-B# configure terminal
Nexus 5000-B(config-vsan) # vlan 100
Nexus 5000-B (config-vsan)# vsan 100 name vsan100

Correct answer: A

Explanation:

Reference https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/421_n1_1/b_Cisco_n5k_fcoe_config_gd_re_421_n1_1/Cisco_n5k_fcoe_config_gd_re_421_n1_1_chapter4.html

Question 7

Which feature allows Cisco Nexus 7000 Series switches to be virtualized at the device level?

PONG
VLAN
VRF
VDC

Correct answer: D

Explanation:

Reference https://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-10-slot-switch/White_Paper_Tech_Overview_Virtual_Device_Contexts.html

Question 8

A Cisco UCS chasis has two power suppliers connected to one PDU and two power supplies connected to another PDU. You would like to protect against the failure of one entire PDU.

In this scenario, which power policy should you configure in UCS Manager?

N+1
redundant
N+2
grid

Correct answer: D

Explanation:

Reference https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/3-0/b_UCSM_GUI_User_Guide_3_0/b_UCSM_GUI_User_Guide_3_0_chapter_0100010.html

Question 9

Your customer needs a new Nexus switch that can support at least ten 40GbE ports, and has room for future growth. Your customer would also like the new switch to be Application Centric Infrastructure- ready.

Which switch meets these requirements?

Nexus 7004
Nexus 5672
Nexus 6004
Nexus 9504

Correct answer: D

Explanation:

Reference https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/application-policy-infrastructure-controller-apic/datasheet-c78-732414.html

Question 10

After deploying a FlexPod solution, which tool would you use to validate a successful installation?

Hardware Universe
Config Advisor
System Manager
UCS Manager

Correct answer: C

Explanation:

Reference https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/UCS_CVDs/flexpod_saphana_n9k_aff.html

Exam	FlexPod Implementation and Administration
Number	NS0-171
File Name	Network Appliance.NS0-171.PracticeDumps.2017-12-18.57q.tqb
Size	8 MB
Posted	Dec 18, 2017
Download	Network Appliance.NS0-171.PracticeDumps.2017-12-18.57q.tqb

Download Network Appliance.NS0-171.PracticeDumps.2017-12-18.57q.tqb

File Info

How to open VCEX & EXAM Files?

Demo Questions