Free Download NS0-591 Examp Dump: Network Appliance.NS0-591.ExamLabs.2020-02-11.36q.vcex

Question 1

When does ONTAP overwrite a block that contains existing data?

after a user edits a file
after the block has been marked free
when file permissions are changed
when a file is copied in a LUN

Correct answer: D

Question 2

Your customer has initiated several volume move commands to redistribute the workload in their 8-node cluster. To verify that this process is not affecting their client access, they were monitoring the network switches that provide client access, but they do not see the network load of the volume move command.

In this scenario, what is the reason for the behavior?

The volume move command uses the HA iWarp interconnect, not the client access switches.
The volume move command uses copy offload protocol, so it does not show up when monitored.
The volume move command uses the intercluster LIFs, not the data LIFs.
The volume move command uses the cluster interconnect switches, not the client access switches.

Correct answer: B

Question 3

A customer reports that a takeover has been disabled on an HA pair.

What would be a cause for this to happen?

The HA interconnect is not functioning properly.
There is a disk running too hot.
The interface for the hardware assist has become unavailable.
The cluster network is not functioning properly.

Correct answer: A

Explanation:

Reference: https://kb.netapp.com/app/answers/answer_view/a_id/1004174/~/what-are-the-common-causes-of-high-availability-takeover-impossible-events%3F-

Question 4

Click the exhibit button.

Many end users are complaining that logging in their systems takes a long time. When the login to the desktop finishes, everything is fine. The home directories are on NetApp storage. You do not see any significant disk or CPU contention on the controller, so you gather output statistics from the controller and focus on SMB.

Referring to the exhibit, which two actions would help diagnose the problem? (Choose two.)

Engage your Windows team to make sure that the domain controllers are not overloaded.
Engage your desktop team to collect network traces from the clients.
Collect more statistics to determine whether the controller itself is causing latency.
Engage your network team to make sure that there are no issues between the storage controller and the domain controller.

Correct answer: CD

Question 5

Click the exhibit button.

A customer reports that their system recently began logging an error.

Referring to the exhibit, which two statements are correct? (Choose two.)

The bcomd application is responsible for monitoring the observed behavior.
A user is attempting to restart the ntpd daemon.
The spmd application failed to restart the ntpd daemon.
The ntpd daemon is responsible for time services.

Correct answer: BD

Question 6

Click the exhibit button.

A customer has an FC SAN with brocade switches. Each server attached to the SAN gas four FC ports. The customer describes that one of their servers has only four paths to the LUNs configured on the cluster. There should be eight paths on all the other servers. The switch administrator has verified the zone configuration.

Referring to the exhibit, which two actions would you perform to troubleshoot the problem? (Choose two.)

Review the LIF configuration on the cluster.
Review the driver version on the server.
Review that the host side FC link ports are enabled.
Review the igroup configuration on the cluster.

Correct answer: AB

Question 7

Click the exhibit button.

A volume move operation has been initiated to move a volume named MirrScr from one aggregate to another. The operation failed with the error that is shown in the exhibit.

In this scenario, which statement is correct?

Manually trigger the cutover process in order to restart the job.
The volume move cannot be completed at this time because of high use in this node.
There are too many snapshots on the source volume.
Cancel and restart the volume move operation.

Correct answer: A

Explanation:

Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-930%2Fvolume__move__start.html

Question 8

Click the exhibit button.

You are troubleshooting a system in which the customer reports that aggregates on Stack 6c/12b are having slow response tomes from system NETAPP1CLUS-02.

Referring to the exhibit, which two statements are correct? (Choose two.)

The aggregates have only one PHY running at six gigabits per second on 6c.
PHY 2 is running at six gigabits per second; on system NETAPP1CLUS-02, reseat IOM6 Module A on Shelf 10.
The shelf module firmware is downrev; on system NETAPP1CLUS-02, replace IOM6 Module A on Shelf 10.
The aggregates have only PHY at six gigabits per second on 12b.

Correct answer: AC

Question 9

What is a major difference between NFSv3 and NFSv4.x?

NFSv4.x is stateful, and NFSv3 is stateless.
NFSv4.x requires an auxiliary protocol for status monitoring, and NFSv3 does not.
NFSv4.x is stateless, and NFSv3 is stateful.
NFSv4.x requires an auxiliary protocol for mounting, and NFSv3 does not.

Correct answer: A

Explanation:

Reference: https://whyistheinternetbroken.wordpress.com/tag/nfsv4-1/

Question 10

In a 4-node cluster, nodes 1 and 2 are an HA pair, and nodes 3 and 4 are an HA pair. The following error appears in the log.

12/15/2018 15:48:47 node-2 CRITICAL clam.node.ooq: Node (name=node- 2, ID= 1001) is out of “CLAM quorum” (reason =quorum update).

In this scenario, which two statements are correct? (Choose two.)

All LUNs are offline in the cluster.
All LUNs are online in the cluster.
Node 1 takes over node 2.
Node 2 takes over node 1.

Correct answer: AC

Exam	NetApp Certified Support Engineer, ONTAP Specialist
Number	NS0-591
File Name	Network Appliance.NS0-591.ExamLabs.2020-02-11.36q.vcex
Size	7 MB
Posted	Feb 11, 2020
Download	Network Appliance.NS0-591.ExamLabs.2020-02-11.36q.vcex

Download Network Appliance.NS0-591.ExamLabs.2020-02-11.36q.vcex

File Info

How to open VCEX & EXAM Files?

Demo Questions