Download Oracle.1z0-489.ActualTests.2017-01-03.40q.vcex

Download Exam

File Info

Exam SPARC M6-32 and SPARC M5-32 Servers Installation Essentials
Number 1z0-489
File Name Oracle.1z0-489.ActualTests.2017-01-03.40q.vcex
Size 26 KB
Posted Jan 03, 2017
Download Oracle.1z0-489.ActualTests.2017-01-03.40q.vcex

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase

Coupon: MASTEREXAM
With discount: 20%





Demo Questions

Question 1

Email alert notifications have stopped working. Which two targets should be checked to confirm that email alert configuration has been set up correctly?


  1. /SP/clients/smtp
  2. /SP/clients/snmp
  3. /SP/faultmgmt
  4. /SP/config
  5. /SP/alertmgmt/rules
Correct answer: AD
Explanation:
Reference:https://docs.oracle.com/cd/E19469-01/819-4363-12/sunvts_diag_x4540.html
Reference:
https://docs.oracle.com/cd/E19469-01/819-4363-12/sunvts_diag_x4540.html



Question 2

When installing Solaris 11, which two locations can be used to obtain the software?


  1. http://www.oracie.com/technetwork/server-storage/solarisll/downloads/
  2. http://www.oracle.com/freedownloads/
  3. http://edelivery.oracle.com/
  4. http://www.oracieedelivery.com/
Correct answer: BC
Explanation:
Reference:http://docs.oracle.com/cd/E50790_01/doc/doc.121/e50471/snapshot.htm
Reference:
http://docs.oracle.com/cd/E50790_01/doc/doc.121/e50471/snapshot.htm



Question 3

While planning for the installation of a SPARC M5-32 server, you notice that a more recent version of a patch is available than what is currently on the EIS-DVD. 
According to the Enterprise Installation Standard (EIS) methodology, what should you do? 


  1. Always install the most recent version of patch.
  2. Delay installation until the updated patch is published to the EIS-DVD.
  3. Do not install the patch unless instructed to do so by an EIS Alert.
  4. Never install patches outside of the EIS- DVD.
Correct answer: B



Question 4

Before you can configure the service processors, which three pieces of information do you need from the customer? 
 


  1. SP0 IP address
  2. SP1 IP address
  3. domain IP address
  4. Active SP IP address
  5. clock board IP address
Correct answer: ACD
Explanation:
Reference:https://docs.oracle.com/cd/E19469-01/820-6413-13/IPMI_Overview.html
Reference:
https://docs.oracle.com/cd/E19469-01/820-6413-13/IPMI_Overview.html



Question 5

Which three components require IP addresses when you configure the SP network? 


  1. SPO
  2. SP1
  3. ACTIVE_SP
  4. SPARE_ SP
  5. SLAVE_SP
Correct answer: ABC



Question 6

Which component is a building block of physical domains (PDomainsorPDoms)?


  1. CMU
  2. SPP
  3. IOU
  4. DCU
Correct answer: C
Explanation:
Reference:http://docs.oracle.com/cd/E50790_01/doc/doc.121/e50471/snapshot.htm
Reference:
http://docs.oracle.com/cd/E50790_01/doc/doc.121/e50471/snapshot.htm



Question 7

You have used ILOM on other servers before, but notice that there are two targets that are new to ILOM on the SPARC M5-32 server. Which are they?


  1. /System
  2. /Storage
  3. /Servers
  4. /SYS
  5. /sp 
Correct answer: AD
Explanation:
Reference:http://docs.oracle.com/cd/E19469-01/820-6410-12/ilom_netconfig.html
Reference:
http://docs.oracle.com/cd/E19469-01/820-6410-12/ilom_netconfig.html



Question 8

Which three statements are true about PCIecard population on the SPARC M5-32 server? 
 


  1. Each DCU has two sets of PCIe slots. PCIe slots 1-8 are connected to IOB0, and PCIe slots 9- 16 are connected to IOB1.
  2. The order of PCIe card portion is the same in the OCU with 2x or 4x CMUs.
  3. In a 4x CMU environment, PCIe slot 3 shares the same PCIe switch with the EMS (Base I/O board); the same is true for PCIe slots 6,11, and 14.
  4. In 2x CMU environments, PICe slots 3 and 4 share the same PCIe switch with the EMS I/O board); the same is true for PICe slots 5 and 6, PCIe slots 11 and 12, and PCI slots 13 and 14.
  5. In the DCU with 2x CMUs (in slots 0 and 3), you may only populated card to PCIe slots 1-8.
Correct answer: BCE



Question 9

You are performing some of the initial Service Processor (SP) login steps. How do you verify that you are on the Active SP?


  1. Enter > show /SP/redundancy status where the result is "status = In progress".
  2. Enter > show /sp/redundancy status where the result is "status = Active", 
  3. Enter > show /sp/redundancy status where the result is "status = Go",
  4. Enter > show /SP/redundancy status where the result is "status = Ready".
Correct answer: B
Explanation:
Reference:http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/nx- os/system_management/command/reference/sm_cmd_show.html
Reference:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/nx- os/system_management/command/reference/sm_cmd_show.html



Question 10

You run the following command:
-> sec /HOSTO/bootmode script="setenv auto-boot? False" 
You notice on subsequent resets that Solaris boots in the domain. What are three possible reasons for this?


  1. This is a one-time setting.
  2. The default setting for auto-boot? is True.
  3. Keyswitch is set to Normal.
  4. auto-boot? returns to its default setting at the next reset.
  5. Keyswitch is set to Locked.
Correct answer: ABE
Explanation:
Reference:http://docs.oracle.com/cd/E22985_01/html/E22986/z40004eb1395746.html
Reference:
http://docs.oracle.com/cd/E22985_01/html/E22986/z40004eb1395746.html









CONNECT US

Facebook

Twitter

PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount!

Get Now!


HOW TO OPEN VCEX FILES

Use ProfExam Simulator to open VCEX files